Használati útmutató Allsee HB32B
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Allsee HB32B (43 oldal) a Monitor kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/43
High Brightness Professional Monitor User Manual
Manual Version HBA2 .0
High Brightness Professional Monitor User Manual
Page 1
Safety Instructions
• Please keep the display away from any heat sources. Place the display in a
stable and well-ventilated place.
• Please handle with care as product contains glass.
• The holes or openings on the display are designed for ventilation. Do not
cover or block the ventilation holes or openings with any objects.
• Remove protective covering from the screen before you use the display.
• Shut off the power supply before cleaning. Use a soft lint free cloth -
instead of a tissue to wipe the screen.
• You may use a glass cleaner to clean the product as required. However,
never spray the cleaner directly onto the display surface.
• Do not attempt to repair this product yourself! Improper disassembly of
the product may invalidate the warranty and lead to possible danger
• If you have a problem that cannot be solved using the "Troubleshooting"
guidelines, please contact your supplier.
High Brightness Professional Monitor User Manual
Page 2
Quick Start Guide
This section of the guide is to allow swift set up and use of the unit. Please refer to the main part of
the User Guide for full information on use of the unit.
Please follow the steps detailed below:
1 Unpack unit and place in desired location.
2 Take the power lead from the accessories bag, connect power lead and plug into mains outlet.
The unit will power ON automatically (if it doesn’t please ensure the “AC Switch” is in the on
position). After powering up the screen will start to play -some pre loaded sample content.
3 Collect the files you wish to display and make sure they are supported by the unit (see Section
2.1)
4 On a PC copy the files you want to play onto an empty USB drive. These should be in the root
directory (without putting them into a folder). Remove USB from PC.
5 Insert USB drive into the one of the USB ports located on the rear of the unit (see Figure 1 ).
The screen should indicate that it is copying the files onto the unit. Please note that all files
currently stored in the unit will be deleted. Once completed, the screen will display a message
to remove the USB drive.
6 Remove the USB drive and the unit will reboot and play the stored files in a loop.
Figure 1 Position of USB ports
Termékspecifikációk
| Márka: | Allsee |
| Kategória: | Monitor |
| Modell: | HB32B |
Szüksége van segítségre?
Ha segítségre van szüksége Allsee HB32B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Monitor Allsee
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
Útmutatók Monitor
- Monitor Krom
- Monitor Kubo
- Monitor GlobalTronics
- Monitor Sanyo
- Monitor AOpen
- Monitor Atlantis Land
- Monitor IHealth
- Monitor TV One
- Monitor EC Line
- Monitor Viewsonic
- Monitor NEC
- Monitor Colormetrics
- Monitor Satco
- Monitor Mirai
- Monitor CSL
Legújabb útmutatók Monitor
9 Április 2025
9 Április 2025
9 Április 2025
8 Április 2025
8 Április 2025
5 Április 2025
5 Április 2025
4 Április 2025
2 Április 2025
2 Április 2025