Használati útmutató American International TOYK989

Olvassa el alább 📖 a magyar nyelvű használati útmutatót American International TOYK989 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak.

/ 2 PDF

Double DINMount Applications

NOTE: Remove shaded pocket support Tabs on left and right bracket.

1.Remove the shaded tab from the bottom of each left and right mounting bracket (See figure C below).

2. Cut and remove center rib from main frame andfile edges smooth.

3.Attach the left and right side brackets to the main frame (See figure C below).

4. Followsteps 4-6 from single ISO instructions on page 3.

5. Attach arear support bracket tothe rear ofthe radio components and adjust as needed

to allowrear support in the sub-dash (optional).

CUSTOMER HELP LINE

8am-4:30 P.S.T. Monday-Friday Except Holidays

USA 800-323-4329 • Canada 800-245-8777

Toyota

2008-12HIGHLANDER (WITHOUTFACTORY NAVIGATION)

VEHICLE APPLICATIONS

KITASSEMBLY INSTRUCTIONS

NOTE: #1 -ISO trim ring (DITR989) must be used in place ofafter-market radio’s trim rings. For ISO mount

applications, mount after-market radio components to side brackets usingscrews provided with

radio when possible or hardware includedwith kit.

For ISO mount only:Attach(1) ISO Spacer to the

inside of lower sections on both Left

& Right mounting brackets as shown in Fig. A.

Cut

Cut

Left

Right

Fig. A

DITR989

IMB989L

IMB989R

Fig. C

Main Frame

TOYK989 Mounting Kit

iTOYK989 ©2017 AMERICANINTERNATIONALINDUSTRIES,INC.TECHVer. 06/17PRINTVer.06/17

Remove shaded pocket

supportTabs on left

and right bracket.

Termékspecifikációk