Használati útmutató Analog Way RK-350

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Analog Way RK-350 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.2 csillagra

RK-350- Ref. RK-350

QUICK START GUIDE

Thank you for choosing Analog Wayand the RK-350. By following these simple steps, you should be able

to setup and use your powerful remote Control Keypad within minutes. Discover the extensive RK-350

capabilies and intuive interface while conguring your rst show, and unleash your creavity for a new

experience in show and event management by Analog Way.

• 1 x RK-350 (RK-350)

• 1 x Power supply cord

• 1 x DB9 (M/F) cable

• 1 x Carrying case

• 1 x Quick Start guide*

* The Quick Start guide is also available on www.analogway.com

WHAT’S IN THE BOX

RK-350 SETTINGS

•The RK-350automacally detects the right versions of

the product to control. Connect the DB9 cable supplied

or an Ethernet crossover cable using the same protocol

as the connected unit.

• To control the following Seamless Switchers:

Control Mode

Seamless

Mixer

Seamless

Matrix

Quadravision

EKS550

xxx

QMX150

x

SMX250

x

QVU150

x

PLS350

xx

SPX450

xx

Navigaon Menu:

To access the menu, press the RK-350EXIT/MENUbuon

in the control secon. To highlight items in the menu which

will appear on the VFD screen, turn the scroll knob le or

right to the desired menu item. When you have reached

the desired menu item, press the ENTERbuon in the

control secon to access that menu funcon.

Pressing the ENTERbuon when a selecon has been made

sets the value to that selecon in the RK-350 memory.

When all sengs have been made, press the EXIT/MENU

buon to exit sub-menus and return to the main menu.

IMPORTANT:simply selecng a menu item will not set

it to that value. Be sure to press the ENTERbuon when

parametering the menu items.

Once you have connected your to your switcher, RK-350

congure the connecon sengs on both devices.

For a serial connecon, select RS232 from the RS232/LAN

menu on both devices. (In menu)CONTROL

For a LAN connecon, select LAN from the RS232/LAN menu

on both devices (In CONTROLmenu), and congure each

device with a unique IP in the LAN setup > RK-350 address

menu. The default IP on the is . RK-350192.168.2.141

Next, enter the IP of the device you wish to control in the

Lan Setup > Device address menu.

Once your sengs are correct, the RK-350will begin

to synchronize with the device, and you will be ready to

begin. (Wait a minute).

Buon color usage:

Solid red:

#1 = Source is on the Program output

#2 = Freeze enable

#3 = Stand-by buon

#4 = Mute enable

Solid green:

Solid orange:

Blinking red:

Blinking green:

#1 = Source is on Preview

#2 = Funcon available for modicaon

Unlocked sources / Shied keys

Layer/source selected or is currently acve

on the Program output

Layer/source selected or is not currently

acve on the Program output

Go on our website to register your product(s)

and be noed about new rmware versions:

hp://bit.ly/AW-Register

Termékspecifikációk