Használati útmutató Apart HM25-G
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Apart HM25-G (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 3.7 csillagra
Oldal 1/4

INFO@APART-AUDIO.COM
1

WWW.APART-AUDIO.COM
2
The HM25-G is a powerfull full metal weatherproof industrial horn loudspeaker
with compression driver.
This hornspeaker offers you a high sound pressure ideally suited for speech and the
reproduction of alarm signals. Ideal for long-distance and outdoor use.
The HM25-G housing is made of aluminum and is supplied with a aluminum
bracket to avoid corrosion.
The loudspeaker is equipped with a high quality 100 volt transformer with three
power taps, including a thermal overload cut-off switch.
The APart technology avoids any overload of your amplifier by controlling the
impedance with the unique IMC protection device inside. This circuit controls
the speaker’s impedance even beyond its nominal frequency range and thereby
protects your 100 volt amplifiers from overloads.
When required, connect the yellow/green earth wire to the earth connection of the
electrical system. This is not the same as the speaker ground (black wire) ! Never
connect the black speaker wire to the electric earth connection (yellow/green wire) !
The yellow/green wire is for additional electrical safety purposes only !
A aluminum mounting bracket for mounting is included in the packing.
The bracket allows you to rotate the speaker over a range of more than 180
degrees. Securely mount the bracket to a wall or other solid surface. Connect the
speaker line with the included speaker wire and make sure that all connections are
weather proof. The desired power can be selected by removing the back cover of
the speaker. On the transformer you will notice 3 power taps marked 25W (factory
setting), 20W and 10W. In order to change the speaker’s power setting, simply
slide the red wire connector on the corresponding power tap on the 100 volt
transformer.

INFO@APART-AUDIO.COM
3
Technical specifications
Specification / Type HM25-G
Type Compression driver horn speaker
Material Aluminium
Standard color Grey RAL7035
Rated power RMS 25Watts / 100Volt
Music power RMS 30Watts / 100Volt
Transformer power taps 25 - 20 - 10Watts / 100Volt
Impedance 400 - 500 - 1000Ω @ 100Volt
Thermal fuse Cut off temperature 152°C
Frequency range 300Hz - 10KHz
Sound pressure level 1W/1m: 103dB
Maximum sound pressure level 117dB
Cable lenght 100cm
Dimension outside 210mm
Dimension outside lenght 264mm
Weight including mounting bracket 1.90Kg
Mounting holes 3 x 8.5mm, approx 25mm spacing
IP rating 66
100
dBSPL
200Hz 1K 2K 5K 10K 20K
80
60
Termékspecifikációk
Márka: | Apart |
Kategória: | hangszóró |
Modell: | HM25-G |
Szüksége van segítségre?
Ha segítségre van szüksége Apart HM25-G, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók hangszóró Apart
8 December 2024
8 December 2024
8 December 2024
8 December 2024
2 Október 2024
2 Október 2024
30 Szeptember 2024
19 Szeptember 2024
15 Szeptember 2024
11 Szeptember 2024
Útmutatók hangszóró
- hangszóró Crest Audio
- hangszóró Soundmaster
- hangszóró M-Audio
- hangszóró Soundcore
- hangszóró Einhell
- hangszóró Clarion
- hangszóró Sunstech
- hangszóró Leitz
- hangszóró Schardt
- hangszóró Arctic Cooling
- hangszóró TFA
- hangszóró Induction Dynamics
- hangszóró Soundlogic
- hangszóró ESX
- hangszóró Magnat
Legújabb útmutatók hangszóró
10 Április 2025
10 Április 2025
9 Április 2025
8 Április 2025
8 Április 2025
8 Április 2025
7 Április 2025
7 Április 2025
5 Április 2025
3 Április 2025