Használati útmutató APC Symmetra LX
Olvassa el alább 📖 a magyar nyelvű használati útmutatót APC Symmetra LX (2 oldal) a Accu kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/2
Symmetra LX
Start-Up Guide
Extended Run Cabinets
For use with Symmetra LX UPS models:
990-1873-001 04/2005
®
200V, 4–8 kVA
208/240V, 4–8 kVA
220/230/240V, 4–8 kVA
200V, 4–16 kVA
208/240V, 4–16 kVA
220/230/240V, 4–16 kVA
READ FIRST
This guide is applicable for the Symmetra LX tower and rack-mount
extended run cabinet models. These units provide extended run time for the
Symmetra LX tower or rack-mount UPS models.
See and retain the product documentation shipped with your system for
other important installation, operation, and maintenance instructions.
Illustrations are representative. The Symmetra LX configuration, including
components and optional APC equipment, may be different from the models
shown in this guide.
Entire contents copyright 2005 by American Power Conversion Corporation.
All rights reserved. Reproduction in whole or in part without permission is
prohibited.
APC, the APC logo, InfraStruXure, PowerChute, Smart-UPS and Symmetra
are registered trademarks of American Power Conversion Corporation. All
other trademarks are the property of their respective owners.
9-Battery
Rack-mount
Extended Run
9-Battery
Tower
Extended Run
3-Battery
Rack-mount
Extended Run
Overview
1. Read Safety and General Information Instructions
2. Refer to the UPS Documentation
If installing the Symmetra LX and the Extended Run Cabinet(s),
install according to the instructions in the Symmetra LX Start-Up
Guide shipped with the UPS.
3. Install the Extended Run Cabinet(s)
Perform the physical installation for the extended run cabinet(s).
See the included Symmetra LX Physical Installation Guide.
4. Follow the proceeding Start-Up Instructions
See these instructions once the physical installation for the
Extended Run Cabinet(s) is complete. This section contains
information on how to connect, test, and start the unit.
Electrical
Hazard
• Read, understand and follow ALL safety
instructions contained in the Symmetra LX Safety
Instructions and General Information Guide.
• Failure to follow safety instructions and warnings
could result in equipment damage, serious injury,
or death.
Start-Up Instructions
1. Connect the first Extended Run Cabinet
1.1 Remove the screw and battery connector cover from the
back of the UPS.
1.2 Connect the power cable of the first extended run cabinet
to the UPS battery connector .
1.3 Set the dial of the extended run cabinet to ‘2’.
1.4 Connect the communications cable from the extended run
communications connector on the UPS to the connector on
the extended run cabinet .
Note
The illustrations shown in this section are applicable for the
tower and rack-mount extended run cabinets.
Note
If connecting to a UPS with integrated extended run, set the
dial of the first extended run cabinet to ‘3’ instead of ‘2’.
Termékspecifikációk
| Márka: | APC |
| Kategória: | Accu |
| Modell: | Symmetra LX |
Szüksége van segítségre?
Ha segítségre van szüksége APC Symmetra LX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Accu APC
14 December 2024
14 December 2024
14 December 2024
14 December 2024
13 Augusztus 2024
10 Augusztus 2024
7 Augusztus 2024
5 Augusztus 2024
4 Augusztus 2024
27 Július 2024
Útmutatók Accu
- Accu A-solar
- Accu Genaray
- Accu Fein
- Accu Cortina
- Accu Arctic Cooling
- Accu Cocraft
- Accu PAG
- Accu Sungrow
- Accu Husqvarna
- Accu DeWalt
- Accu CyberPower
- Accu Lenmar
- Accu HQ
- Accu Anton/Bauer
- Accu E-flite
Legújabb útmutatók Accu
3 Április 2025
10 Január 2025
4 Január 2025
3 Január 2025
1 Január 2025
31 December 2025
31 December 2025
31 December 2025
30 December 2025
30 December 2025