Használati útmutató Asus RP-AC56

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Asus RP-AC56 (2 oldal) a hozzáférési pont kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.3 csillagra

Quick Start Guide

RP-AC56

Wire-ACRgxtr less1200 ane Eende

Q10397

First Edition

April 2015

1. Power LED

: RP-AC56 is onOn

2. 5 GHz Wi-Fi LED

: RP-AC56 provides excellent Wi-Fi Green

extender performance.

: RP-AC56 provides aeptable Wi-Fi Orange cc

extender performance.

: RP-AC56 provides poor Wi-Fi extender Red

performance.

: RP-AC56 is not connected to a router/AP.

3. 2.4 GHz LED

: RP-AC56 provides excellent extender Green

performance.

: RP-AC56 provides aeptable Wi-Fi Orange cc

extender performance.

: RP-AC56 provides poor Wi-Fi extender Red

performance.

: RP-AC56 is not connected to a router/AP.

Quick Setup with WPS (Wi-Fi Protected Setup)

For router/Access Point(AP) with WPS support

Power On

Place your RP-AC56 near your router/AP and plug it

to a power outlet.

Wait until the power LED

turns solid green.

Connect via WPS (Wi-Fi otected Setup)Pr

1. Press the WPS button on your

Router/AP.

2. Press the WPS button on your RP-AC56 for

more than two (2) seconds until the LEDs

start to blink.

NOTE: Ensure that your router/AP supports WPS. Otherwise, use Method TWO.

about two (2) minutes and

then turns solid green. The

color of the LED indicates

the Wi-Fi signal strength.

3Place in an ideal location

After placing your RP-AC56 in an ideal location, RP-AC56 connects to your router/AP in about one (1) minute.

NOTES:

• Place your RP-AC56 between your router/AP

and wireless device to get the best extender

performance.

• Place your RP-AC56 in a location where you can

get green or orange Wi-Fi LED.

IMPORTANT!

• To minimize interference, keep RP-AC56 away from devices like cordless phones, Bluetooth devices and microwave ovens.

• We recommend that you place your RP-AC56 in open or spacious location.

Enjoy!

1 2

Frequently Asked Questions (FAQ)

Q1: What should I do if my router does not support WPS?

A1:You can use Method Two to set up RP-AC56.

Q3: Why is it that I cannot see the login page after entering

http://repeater.asus.com in the bwser?ro

A3:Ensure that your computer is connected to the extender network only,

and set your computer to Obtain an IP address automatically.

Q2: Why is that the Wi-Fi LED does not light up after completing Method

Two?

A2: You may have entered the wrong router SSID and password. Reset your RP-AC56,

double check your router SSID/passwo, and set up RP-AC56 again.rd

Q4: How do I reset RP-AC56?

A4: Press the RESET button on the front ver of RP-AC56 for about two (2) co

Method One

Your RP-AC56’s wireless network name (SSID) chang-

es to your existing Wi-Fi network name, ending with

_RPT _RPT5G or and shares your router/AP’s Wireless

Password.

Q10397_RP-AC56_QSG_Special.indd 12015/6/10 17:31:34

Termékspecifikációk