Használati útmutató Bazooka BTA10100FHC

Bazooka mélynyomó BTA10100FHC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bazooka BTA10100FHC (1 oldal) a mélynyomó kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
How to install the FAST-9999 with the FAST-BTAH
The FAST-9999 universal harness uses the patented Posi-Tap connector from Posi-Products for making
FAST secure connections to your OEM wire harness.
Posi-Tap Patent # 5,228,875 5,695369 5,868,589 6,692,313 Jap 2881414, Aus 708700, Tia 103534, Can 2204826TM
Mex 200626 Korea 477279, China Z197105562.9 & others pending
Disconnect negative battery clamp from battery.
For easiest installation remove the radio and disconnect
the harness from the back of the radio.
Connect the Posi-Tap connectors to the corresponding
wires of your radio harness. Consult your car or radio
manufacturers manual to get the correct color codes
for your vehicle.
Red (+) 12V Power. Turns on when ignition/accessory is on.
Blue/White Turns on remote accessories (amplifiers, etc.).
If there is no Remote Amplifier wire, you can often use the
power antenna wire.
White (+) Left Front Speaker
White/Black (-) Left Front Speaker
Gray (+) Right Front Speaker
Gray/Black (-) Right Front Speaker
Remove the top cap. Place the wire
that is going to be tapped. In the
grove of the cap as far down as it
will go.
Make sure not to cross thread the
cap when screwing it back in place.
Make sure the end with the 6 pin Molex connectors is
toward the radio. Run the BTAH harness behind radio,
dash and along the edge of the vehicle until you get
to the place you have decided to mount the tube.
Continue to thread until the cap
is tight and the wire is pierced.
Make sure to attach all 6 of the
FAST-9999 harness wires to
your OEM harness.
Plug the FAST-9999 harness into
the FAST-BTAH. Mount grounding
ring and plug the 14 pin connector
into the BASS TUBE. For more information
on placement and mounting, consult
your amplified tube instruction manual.
FAST-9999
14 pin connector
to the BAZOOKA
Ground to
chassis of
vehicle
FAST-BTAH

Termékspecifikációk

Márka: Bazooka
Kategória: mélynyomó
Modell: BTA10100FHC

Szüksége van segítségre?

Ha segítségre van szüksége Bazooka BTA10100FHC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mélynyomó Bazooka

Bazooka

Bazooka MBT1014 Útmutató

28 December 2024
Bazooka

Bazooka MBT8014 Útmutató

28 December 2024
Bazooka

Bazooka BT8018 Útmutató

19 Augusztus 2024
Bazooka

Bazooka BTA8100FHC Útmutató

19 Augusztus 2024
Bazooka

Bazooka BT1028DVC Útmutató

19 Augusztus 2024
Bazooka

Bazooka BT6024DVC Útmutató

19 Augusztus 2024
Bazooka

Bazooka BTA850FH Útmutató

19 Augusztus 2024
Bazooka

Bazooka BTA10100 Útmutató

19 Augusztus 2024
Bazooka

Bazooka BT1214 Útmutató

19 Augusztus 2024
Bazooka

Bazooka BT6028DVC Útmutató

18 Augusztus 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó