Használati útmutató Behringer Vintage Tube Overdrive TO800

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Behringer Vintage Tube Overdrive TO800 (22 oldal) a gitár kategóriában. Ezt az útmutatót 16 ember találta hasznosnak.

/ 22 PDF

Thank you for showing your condence in us by purchasing the

Behringer VINTAGE TUBE OVERDRIVE TO800. This high-quality

eects pedal is ideally suited for giving electric guitars maximum

exibility with classic overdrive sounds that capture every nuance

of your playing—from smooth overdrive to screaming tube

sounds. Thanks to its high-performance features you get tube-like

vintage-style distortion, smooth sustain and super fat tone.

1.Controls

(1) The DRIVE control adjusts the intensity of the overdrive eect.

(2) The LEVEL control adjusts the output level.

(3) The TONE control allows you to shape your overall sound.

(4) The ON/BATT LED illuminates when the eect is activated. It also

serves as a battery level indicator.

(5) Use the footswitch to activate/deactivate the eect.

(6) Use this ¼" TS IN connector to plug in the instrument cable.

(7) The ¼" TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power

supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover.

To install or replace the 9 V battery, press the hinges with a ballpen and

remove the pedal cover. Be careful not to scratch the unit.

◊◊The TO800 has no on/o switch. As soon as you insert the

jack into the in connector, the TO800 begins running.

When not using the TO800, remove the jack from the

in connector. This extends the life of the battery.

The SERIAL NUMBER is located on the bottom.

V 1.0

VINTAGE TUBE OVERDRIVE TO800

Vintage Tube-Sound Overdrive Eects Pedal

(1)

(7)

(4)

(2)

(6)

(5)

(3)

Termékspecifikációk