Használati útmutató Beko WMB 81241 PTLMC

Beko Mosógépek WMB 81241 PTLMC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Beko WMB 81241 PTLMC (72 oldal) a Mosógépek kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/72
2820522627_EN / 13-12-12.(14:50)
Document Number
WMB 81241 PTLMC
Washing Machine
Users Manual
Перална машина
Ръководство за употреба
Plně automatická pračka
Uživatel Manuál
Perilica rublja
Korisnički priručnik
2 / 72 EN Washing Machine / User’s Manual
1 Important instructions for safety and
environment
This section contains safety instructions that will help protect
from risk of personal injury or property damage. Failure to
follow these instructions shall void any warranty.
1.1 General safety
• This product can be used children by at and above 8
years old and by persons whose physical, sensory or
mental capabilities were not fully developed or who
lack experience and knowledge provided that they are
supervised or trained on the safe usage of the product
and the risks  it brings out.   Children must not play with
the product. Cleaning and maintenance works should not
be performed by children unless they are supervised by
someone.
• Never place the product on carpet-covered floor. a
Otherwise, lack of airflow beneath the machine will cause
electrical parts to overheat.This will cause problems with
your product.
• If the product  has failure,a   it should not be operated
unless it is repaired the by Authorized Service Agent.
There is the risk of electric shock!
• This product is designed to resume operating in the event
of powering on after power interruption.a If you wish to
cancel the programme, see "Cancelling the programme"
section.
• Connect the product to grounded outlet protecteda
bya16A fuse. Do not neglect to have the   grounding
installation made a by qualified electrician. Our company
shall not be liable for any damages that will arise when
the product is used without grounding in accordance with
the local regulations.
• The water supply and draining hoses must be securely
fastened and remain undamaged.Otherwise, there is the
risk of water leakage.
• Never open the  loading door or remove   the filter while
there is still water in the drum. Otherwise, risk of flooding
and injury from hot water will occur.
• Do not force open the locked loading door.   The loading 
door will be ready to open just afew minutes after the
washing cycle comes to an end. In case of forcing the
loading door to open, the door and the lock mechanism
may get damaged.
• Unplug the product  when not in use. 
• Never wash the product spreading or pouring water by
onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never unplug by
pulling on the  cable,   always pull out by grabbing the plug. 
• Use detergents, softeners and supplements suitable for
automatic washing machines only.
• Follow the instructions on the textile tags and on the
detergent package.
• The product must be unplugged during installation,
maintenance, cleaning and repairing procedures.
• Always have the installation and repairing procedures
carried out by theAuthorized Service Agent.
Manufacturer shall not be held liable for damages that
may arise from procedures carried out unauthorized by
persons.
• If the power cable is damaged, it must be replaced the by
manufacturer, after sales service or similarly qualified a
person (preferably an electrician) or someone designated
by the importer in order to avoid possible risks.   
1.2 Intended use
• This product has been designed for domestic use. It is not
suitable for commercial use and it must not be used out
of its intended use.
• The product must only be used for washing and rinsing of
laundry that are marked accordingly.
• The manufacturer waives any responsibility arisen from
incorrect usage or transportation.
1.3 Children's safety
• Packaging materials are dangerous to children.Keep
packaging materials in a safe place away from reach of
the children.
• Electrical products are  dangerous for the children.   Keep
children from away the product when it is in use. Do not
let them to tamper with the product. Use child lock to
prevent children from intervening with the product.
• Do not forget to  close the loading door when  leaving the 
room where the product is located.
• Store all detergents and additives in safe a place away
from the reach  of the children closing the  by  cover of the  
detergent container or sealing the detergent package.
1.4 Package information
• Packaging materials of the product are manufactured
from recyclable materials in accordance with our
National Environment Regulations.   Do not dispose of the 
packaging materials together with the domestic or other
wastes. Take them to the packaging material collection
points designated by the local authorities.
1.5 Disposing of the waste product
• This product has been manufactured with high quality
parts and materials which can be reused and are suitable
for recycling. Therefore, do not dispose the product with
normal domestic waste at the end of its service life. Take
it to a collection point for the recycling of electrical and
electronic equipment. Please consult your local authorities
to learn the nearest collection point. Help protect the
environment and natural resources by recycling used
products. For children's safety, cut the power cable and
break the locking mechanism of the loading door so that
it will be non-functional before disposing of the product.
1.6 Compliance with WEEE Directive
This appliances packaging material is
recyclable. Help recycle it and protect the
environment dropping by it off in the municipal
receptacles provided for this purpose. Your
appliance also contains a great amount of
recyclable material. It is marked with this label
to indicate the used appliances that should not
be mixed with other waste. This the appliance recycling way,
organised your by manufacturer will be done under the best
possible conditions, in compliance with European Directive
2002/96/EC on WasteElectrical and Electronic Equipment.
Contact your town hall or your retailer for the used appliance
collection points closest to your home. thank you doing We
your part to protect the environment.
3 / 72 EN Washing Machine / User’s Manual
2 Installation
Refer to the nearest Authorised ServiceAgent for installation
of the product.  To  make the product ready for use, review
the information in the user manual and make sure that the
electricity, tap water supply and water drainage systems are
appropriate before calling the Authorized Service Agent. If
they are not, acall qualified technician and plumber to have
any necessary arrangements carried out.
CPreparation of the  location and electrical,   tap water and
waste water installations at the place of installation is
under customer's responsibility.
Bwarning: Installation and electrical connections of
the product must be carried out by theAuthorized
ServiceAgent. Manufacturer shall not be held liable for
damages that may arise from procedures carried out by
unauthorized persons.
Awarning: Prior to installation, visually check if the product
has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
CMake sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after
installation or cleaning procedures.
2.1 Appropriate installation location
• Place the machine  on rigid floor.a  Do not place it on a
long pile rug or similar surfaces.
• Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other
reaches to approx. 180 kilograms. Place the product
on a solid and flat floor that has sufficient load carrying
capacity!
• Do not place the product on the power cable.
• Do not install the product places where temperature at
may fall below 0ºC.
• Place the product at away 1 least cm from the edges of
other furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the  packaging
reinforcement. Remove the packaging reinforcement by
pulling the ribbon.
2.3 Removing the transportation locks
Awarning: Do not remove the   transportation locks before
taking out the packaging reinforcement.
Awarning: Remove the transportation safety bolts before
operating the washing machine! Otherwise, the product
will be damaged.
1.Loosen all the bolts with a suitable spanner until they
rotate freely (C).
2.Remove transportation safety bolts by turning them
gently.
3.Attach the plastic covers supplied in the User Manual bag
into the holes on the rear panel.
(P)
CKeep the transportation safety bolts in a safe place to
reuse when the washing machine needs to be moved
again in the future.
CNever move the product without the transportation safety
bolts properly fixed in place!
2.4 Connecting water supply
CThe water supply pressure required to run the product is
between1to 10 bars (0.1 –1MPa). It is necessary to
have 10 – 80 liters of water flowing from the fully open
tap in one minute to have your machine run smoothly.
Attachapressure reducing valve if  water pressure is 
higher.
CIf you are going to use the double water-inlet product
as a single (cold)water-inlet unit, you must install the
supplied stopper to the hot water valve before operating
the product. (Applies for the products supplied with a
blind stopper group.)
Awarning: Models with asingle water inlet should not be
connected to the hot water tap. a In such case the laundry
will get damaged or the product will switch to protection
mode and will not operate.
Awarning: Do not use old or used water inlet hoses on the
new product. It may cause stains on your laundry.
1.Connect the special hoses supplied with the product to
the water inlets on the product. Red hose (left) (max. 90
ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is
for cold water inlet.
Awarning: Ensure that the cold and hot water connections
are made correctly when installing the product.
Otherwise, your laundry will come out hot the end at of
the washing process and wear out.
2.Tighten all hose nuts byhand. a Never use tool when
tightening the nuts.
3. Open the taps completely after making the hose
connection to check for water leaks at the connection

Termékspecifikációk

Márka: Beko
Kategória: Mosógépek
Modell: WMB 81241 PTLMC

Szüksége van segítségre?

Ha segítségre van szüksége Beko WMB 81241 PTLMC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Mosógépek Beko

Útmutatók Mosógépek

Legújabb útmutatók Mosógépek