Használati útmutató Buffalo TeraStation 4400R

Buffalo szerver TeraStation 4400R

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Buffalo TeraStation 4400R (4 oldal) a szerver kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 3.5 csillagra

Oldal 1/4
The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned
HDDs for the setup process. Use either new HDD(s) or delete all partitions (and
therefore all data) with a partition editor before you start with existing HDD(s).
Step by step
1. Mount one or more HDDs to a frame and insert it in the TeraStation.
2. Prepare the MicroSD and the USB adapter and insert the USB
adapter into a USB 2.0 port, connect power and network.
3. Move the boot switch to USB position.
4. Boot the TeraStation.
Now the unit gives after some minutes a tone, the display
goes red and it says “push function button to start”.
5. Push the function button until beep sounds.
The display status color will be blue and sequence through these messages:
Recovery Preparing
System Recovering
FW/Updating
Recovery Finished, “Change Boot SW
Setup Guide
TeraStation 4000
www.buffalo-technology.com

Termékspecifikációk

Márka: Buffalo
Kategória: szerver
Modell: TeraStation 4400R

Szüksége van segítségre?

Ha segítségre van szüksége Buffalo TeraStation 4400R, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek