Használati útmutató Cardo Q-Solo

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cardo Q-Solo (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.8 csillagra

Q-solo™

Manual

scala

rider®Q-solo

1INTRODUCTION

2CHARGING THE SCALA RIDER

3GETTING STARTED: 3.1STATUS LIGHTS, 3.2 GENERAL FUNCTIONS, VOX ACTIVATION3.3

4PAIRING AND USING A MOBILE PHONE, GPS DEVICE OR ANY MUSIC PLAYERS:

4.1 PAIRING

BLUETOOTH

, 4.2 MAKING AND RECEIVING PHONE CALLS, LISTENING TO MUSIC VIA4.3 A2DP

5TROUBLESHOOTING

6 SUPPORT

INDEX

IMPORTANT:

This is version 1.0 of the User

Manual. Please note, that our

manual is periodically updated

on the Cardo website to include

the very latest features and

functions of your new scala rider.

➊➋ ➌

➍

➎

➏

1. Power Button

2.LED Indicator

3.Music / Mobile Button

4.Volume Up

5.Charging

6.Volume Down

INTRODUCTION

Thank you for choosing the scala riderQ-solo Bluetooth® headset

for motorcycle helmets. This manual will help you set up, congure

and operate it.

1

CHARGING THE SCALA RIDER

Make sure that your scala rider is fully charged for at least 4 hours

before initial use.

Charging with a 5v wall charger is faster than charging with a

computer USB port.

• LED ON – Charging RED

• LED OFF – Charging completeRED

The scala rider Q-solo is waterproof and dustproof. However,

when in use, the USB silicone cover should be kept tightly closed

to prevent moisture from entering the unit.

2

GETTING

STARTED

3.1 STATUS LIGHTS

Nonescala rider is OFF

The BLUE LED ashes once every 3 seconds Standby mode. No active audio sources

The BLUE LED ashes twice every 3 secondsActive mode – Call in progress / music or other audio source is ON

TheRED LED ashes once every 3 secondsStandby mode – Battery is low

TheRED LED ashes twice every 3 secondsActive mode – Battery is low

Solid RED Charging

3

Termékspecifikációk