Használati útmutató Cobra SLR 650G

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cobra SLR 650G (3 oldal) a Navigator kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.9 csillagra

2. Standby Screen

Compass Heading:

Automatically displays GPS-based heading. If a GPS signal cannot

be received will be displayed.

Vehicle Speed:

Automatically displays your current vehicle speed using GPS. If a

GPS signal cannot be received will be displayed.

City/Highway Indicator:

Shows curent filtering mode.

Vehicle Battery Voltage:

Displays your car battery voltage and automatically warns you if

this drops below 11.9V.

IntelliMute Indicator:

See reverse of this manual.

Operating Instructions

b. Dash Mounting

For dash mounting, use the enclosed hook & loop fastener

with double-sided tape. Simply attach it to the bottom of the

unit with display in flip-up position.

Touch-Point Controls

Appropriate touch-point icons will light up automatically to

show you available options. Touch the touch-point icons to

activate corresponding function.

Touching Volume touch-point while receiving an alert

will mute the audible alert. Touching Display Brightness

touch-point will turn off the display.

Model SLR 650G

Supercharged Long-Range

Radar/Laser/Camera Detector

Printed in China Part No. 480-767-P Version D

NOTE: This device complies with part 15 of FCC rules: Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received

including interference that may cause undesired operation.

CAUTION: Modifications or parts not approved by Cobra Electronics

Corporation may violate FCC Rules and void authority to operate this equipment.

Types of Screens

1. Menu/Settings Screen

User Settings:

For customizing settings for IntelliMute, Auto Mute, Voice/Tone

Alerts, Color Themes, Smart Power and Reset to Factory Default.

Alert Settings:

For customizing settings to turn on/off certain individual radar

bands and Low Car Battery Warning.

GPS Settings:

For customizing settings for Speed Format, User-set Speed Alert,

turn on/off certain individual Location-based Alerts, IntelliScope,

AURA Database Info, and Delete User LBAs.

Navigate through using the scroll touch-point. Settings

Press Select to confirm and Menu to save and exit.

3. Radar/Laser Alert Screen

Radar bands consist of X-band, K-band, Ka-band, and Ku-band.

With Radar signals, the signal strength meter shows signal strength

of the radar gun as well as relative proximity to the source. With

Ka-band, you will also be notified of the actual Ka-band radar gun

frequency being used.

With Laser signals, you will always receive full alert and pulse rate

(PPS) of the corresponding laser gun being used. Laser PPS cur-

rently in use are: 100, 125, 130, 200, 238 and 340.

Ka Band Alert

Signal StrengthFrequency

Laser

Pulse

Rate

User

Settings

GPS

Settings

Alert Settings

Volume

Display

Brightness

Right

Scroll

Left

Scroll

City/Highway

Mode

Menu/Save

& Exit

Select

Compass

Heading

Vehicle

Speed

City/Highway

Indicator Vehicle

Battery

Voltage

IntelliMute Indicator

Thank you for purchasing Cobra

®Vedetta™ Series, Model SLR 650G

Radar/Laser/Camera Detector. Please familiarize yourself with the

capabilities your new detector can provide by reading this manual.

Also, please be careful when using your new detector while driving.

Powering Unit On/Off & Mounting Unit

Plug in the detector using the included cigarette lighter power cord.

Press the PowerOn Offbutton momentarily to turn the unit (or ).

Note:To change display orientation, press and hold the Power

button for 2 seconds.

a. Windshield Mount

Lift lever on suction cup base before attaching to the windshield.

Once attached, push against windshield and lock the lever down.

Use the ball-joint adjustment and make sure the detector unit is

aligned level and pointing straight ahead. The display can be in

flip-up or flip-down position to suit preferred mounting location,

and rotated to face directly toward you. Renew suction cup with

a damp cloth or by rinsing under tap water.

Insert bracket

here

Attach to windshield

Power Jack

Power Button

Termékspecifikációk