Használati útmutató Coleman Sundome 12x10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Coleman Sundome 12x10 (2 oldal) a sátor kategóriában. Ezt az útmutatót 29 ember találta hasznosnak.

/ 2 PDF

Connect Frame to Tent

–Insert one end of Main Tent Pole end

onto pin of pin & ring system at tent

corner on tent (illus. 4)

–Go to opposite end of pole and

gradually apply pressure to the pole

forming an arch until you are able to

insert the opposite pole end onto

pin & ring system

–Repeat for second pole (illus.5)

SUNDOME™12’x10’ 2-ROOM

1Layout & Positioning

of Tent, Pole

Assembly

–Layout and position tent with door

facing desired direction. (illus.1)

–Unzip door

–Stake down tent using the rings of the

pin & ring system at the corners of the

tent.Keep the floor taut.(illus.2)

–Assemble Frame Poles by

interlocking shock-corded poles.

This will make two long poles.

–Insert the poles diagonally into Pole

Sleeves.The center of the poles should

cross forming an “X” in the middle of

tent. (illus. 1)

–Fasten Frame Tie on top of tent over

both poles.(illus.1), (illus.3)

2

When You Are Ready To Set Up Your

Tent

–Select a level campsite clear of rocks,

branches and other hard or sharp

objects.

–Do not set up your tent under trees.

–For best results in windy conditions,

position the end of tent into the wind.

–See owners manual for more tips.

Rainfly

Poles

Rainfly Part No. 9260C131

Main Tent

Poles

POLE ASSEMBLY PARTS

Assembled

poles

inserted

through

pole

sleeves

Frame Tie

Instructions apply to Part Number 9260D121

illus. 1

illus. 2 Tent stake

through ring

illus.4

Insert pole end onto

pin & ring

illus. 5 Tent

frame set-up

illus. 3

Frame Tie

Part No. 9260-128

Part No. 9260-130

Part No. 9260-129

Termékspecifikációk