Használati útmutató Crestron Saros Sound Bar 200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crestron Saros Sound Bar 200 (2 oldal) a Soundbar kategóriában. Ezt az útmutatót 25 ember találta hasznosnak.

/ 2 PDF

SAROS SB-200-P

Saros

®

Sound Bar 200, Powered

crestron.com

|

800.237.2041

>High-quality, full-range amplified

stereo sound bar

>Delivers enhanced sound quality

and performance for use with any

flat panel display

>Mounts to a wall or sits on a shelf

>Balanced or unbalanced stereo

line-level audio input

[1]

>Unbalanced stereo audio cable included

>Powers on and off automatically

>100 to 240 Volt AC powered

The Saros

®

SB-200-P is a stereo sound bar designed to provide

enhanced audio performance for a flat panel display. Its full-range, front-

firing speakers offer an improvement over the small, rear-facing speakers

typical of many display devices. The bracket included with the sound bar

allows for attachment to a wall surface, or the unit can be placed on a

shelf below or above the display.

Built-in amplification allows for direct connection to the line-level audio

output of the display device, or to the output of an audio preamp, switcher,

mixer, tv tuner, codec, or Crestron DM

®

receiver.

[1]

The amplifier powers on

automatically when an audio input signal is detected, and powers off if no

signal is detected for several minutes.

The SAROS SB-200-P sound bar is ideally suited for use with the

Crestron RL

®

2 Group Collaboration System and other unified

communication and videoconferencing systems. It is equally well-suited

for use in any small to medium sized room or public space in a hotel,

restaurant, museum, medical center, airport, office building, or residence.

SPECIFICATIONS

Features & Performance

Woofers: (2) 3 inch (76 mm) polypropylene cone w/rubber surround

Passive Radiator: (2) 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone

w/rubber surround

Tweeters: (2) 1 inch (25 mm) polyester dome

Amplifier Power: 20 Watts per channel, stereo

Frequency Response: 100 Hz to 20 kHz (±3 dB)

Output Sensitivity: 83 dB SPL @ 1 meter, both channels driven @ 1 Watt

Input Sensitivity: 0.75 Vrms per channel for full rated output

Go To Sleep Time: 20 minutes (±5 minutes) with no signal present

Wake Threshold: 5 mV (±2 mV) typical

Connections

BALANCED AUDIO INPUTS: (1) 5-pin 3.5 mm detachable terminal block;

Balanced stereo line-level audio input

[1]

;

Maximum Input Level: 0.85 Vrms;

Input Impedance: 10k Ohms

UNBALANCED AUDIO INPUTS: (2) RCA connectors, female;

Unbalanced stereo line-level audio input

[1]

;

Maximum Input Level: 0.85 Vrms;

Input Impedance: 10k Ohms;

NOTE: Right-angle plugs may be required for wall mount applications. A

59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included.

100-240V~50/60Hz 50W: (1) IEC 60320 C8 main power inlet;

Mates with removable power cord, included

Controls & Indicators

100-240V~50/60Hz 50W: (1) Rocker switch, turns main power on or off

PWR: (1) Blue LED, indicates the main power switch is turned on

Power Requirements

Main Power: 50 Watts (500 mA maximum) @ 100-240 Volts AC, 50/60 Hz

Environmental

Temperature: 41° to 104° F (5° to 40° C)

Humidity: 10% to 90% RH (non-condensing)

Termékspecifikációk