Használati útmutató Crystorama Oakley OAK-7536-SG_CEILING

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crystorama Oakley OAK-7536-SG_CEILING (2 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.6 csillagra

24"

ASSEMBLY INSTRUCTION MODEL # OAK-7536-SG_CEILING

How to install

22"

You will need 6 -LED G9 Bulb

2 Watts Recommended 3.5 Watts Max.

USE LED BULBS FOR EXTENDED USE

15"

3.35"

100"

18"

12.4"

THIS FIXTURE IS DAMP RATED

For Hanging:

Crystoramacom.

1.Using a screw driver, remove the three

screws on the light cluster that are

securing the circular ring in place.

2.Remove the circular ring and install the

LED G9 bulbs (included) then tighten

with the previously removed screws.

3.Feed the wire through the rodsFirst remove.

the open hook on the long rod. Thread the

wire through the openhook and then

through the long rod. Finally, tighten the

open hook and the long rodtogether.

Repeat for the other .twolongrod

4.Take the end of the rod with a open hook

And the other end onto the hook on loop kit.

5Decide the preferred hanging height and.

choose the correct chain length needed.

For Ceiling:

1.Repeat step: # 1-2above.

2.Repeat - , step#34abovechangingthelong

rod to short rod. Changing the pendant

canopy(B) to ceiling canopy(L).

and attach it to the top of the fixture frame.

Termékspecifikációk