Használati útmutató Cuisinart 14-Cup Food Processor DFP-14N

Cuisinart Konyhai robotgép 14-Cup Food Processor DFP-14N

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cuisinart 14-Cup Food Processor DFP-14N (14 oldal) a Konyhai robotgép kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/14
Classic Series 14-Cup Food Processor
INSTRUCTION BOOKLET
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
DFP-14N Series
Recipe
Booklet
Reverse Side
U IB-5370
2
CAPACITY
Recommended work bowl capacity for various foods
FOODS CAPACITY
Chopped and Puréed Fruit 3 cups
and Vegetables
Chopped or Puréed Meat, Poultry, 2-1/4 pounds
Fish or Seafood
Bread Dough 3 pounds (6 cups flour, yielding
two 1-1/2 pound loaves)
Nuts for Nut Butters 3 cups
Sliced or Shredded Fruit, 14 cups
Cheese, or Vegetables
Cake Batter 4 pounds (5 8-inch layers)
Cookie Dough 3-1/2 pounds (90 cookies)
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
®
Food Processor, and these standard
parts for it: metal chopping blade,
dough kneading blade, slicing disc
and shredding disc, detachable stem
for discs and spatula.
CAUTION:
THE CUTTING TOOLS HAVE VERY
SHARP EDGES. To avoid injury when
unpacking the parts, please follow
these instructions:
1. Place the box on a low table or on
the floor next to the kitchen counter
or table where you plan to keep
the food processor. Be sure the
box is right side up.
2. Remove the cardboard panel and
the instructional material.
NOTE: Remember to return your
warranty card complete with all
information carefully filled out.
3. You will see a rectangular block
of plastic foam that holds the
processor parts and DVD, each
fitted into a cavity in the foam.
The dough kneading blade (A) and
detachable stem (B) for the discs
are in cavities at one short side of
the foam block. Remove them first.
The plastic spatula (C) is on one
long side of the foam block.
Remove it next.
The slicing disc (D) is on one long
side and the shredding disc
(E) on the other. Slide them out of
their grooves WITH GREAT CARE;
THE BLADES ARE SHARP.
Now only the work bowl cover (F)
and the pusher assembly (G)
remain in the foam block. Grasp an
edge of the work bowl cover and lift
it straight up. Grasp the pusher
assembly edge near the center of
the box and lift it straight up.
4. Lift out the plastic foam block.
5. The machine base and work bowl
with metal blade are at the bottom
of the box. CAREFULLY REMOVE
THE METAL BLADE BY GRASP-
ING THE CENTER WHITE HUB
AND LIFTING IT STRAIGHT UP.
NEVER TOUCH THE BLADES,
WHICH ARE RAZOR SHARP.
Carefully remove each part from the
4 corners of the box.
6. Remove the base and bowl togeth-
er by grasping the plastic bowl at
the top with both hands and lifting
the bowl straight up. Do not rotate
the bowl clockwise on the base.
This will cause the bowl to sepa-
rate from the base.
7. Place the processor on a counter
or table and read the instructions
thoroughly before using the
machine.
8. Save the shipping cartons and
plastic foam blocks. You may
want to use them in shipping the
processor at a later date.
A
D
F
G
B
E
C
3
IMPORTANT
SAFEGUARDS
Always follow these safety precautions when using
this appliance:
GETTING READY:
1. READ ALL INSTRUCTIONS.
2. Blades are sharp! Handle them carefully.
3. Unplug from outlet when not in use, before putting
on or taking off parts, and before cleaning. To
unplug, grasp plug and pull from electrical outlet.
Never pull cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table or counter,
or touch hot surfaces.
6. Do not operate any appliance with damaged cord
or plug, or after appliance has been dropped or
damaged in any way. Return appliance to the
nearest authorized service facility for examination,
repair or electrical or mechanical adjustment.
Operation:
1. Do not use pusher assembly if sleeve becomes
detached from pusher.
2. Keep hands as well as spatulas and other utensils
away from moving blades or discs while process-
ing food, to prevent possibility of severe personal
injury or damage to Custom 14™Food Processor.
A plastic scraper may be used, but must be used
only when Custom 14™Food Processor motor is
stopped.
3. Avoid contact with moving parts. Never push food
down by hand when slicing or shredding. Always
use pusher, or injury could occur.
4. Make sure motor has completely stopped before
removing cover. If machine does not stop within
4 seconds when you turn cover, call 800-726-0190
for assistance. Do not use machine.
5. Never store any blade or disc on the motor shaft.
To reduce the risk of injury, no blade or disc should
be placed on the shaft except when the bowl is
properly locked in place and the processor is in
use. Store blades and discs, as you would sharp
knives, out of reach of children.
6. Be sure cover is securely locked in place before
operating food processor.
7. Never try to override or tamper with cover interlock
mechanism.
Cleaning
1. To protect against risk of electrical shock, do not
put base in water or other liquid.
General
1. Close supervision is necessary when any
appliance is used by or near children.
2. Do not operate this, or any other motor-driven
appliance, while under the influence of alcohol or
other substances that affect your reaction time or
perception.
3. This food processor is built to our professional
standards. It is UL listed for household use. Use
it only for food preparation as described in the
accompanying recipe book.
4. The use of attachments not recommended or sold
by Cuisinart may cause fire, electrical shock,
personal injury or damage to your Custom 14
™
Food Processor.
5. To avoid possible malfunction of work bowl switch,
never store processor with pusher assembly in
locked position (activation position).
6. Maximum rating of 6.0 amperes is based on
attachments that draw the greatest current. Other
recommended attachments may draw significantly
less current.
TABLE OF CONTENTS
Capacity Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction / Features and Benefits . . . . . . . . . . . . 4
The Parts (Diagram) . . . . . . . . . . . . . . . . . . . . . . . . 4
Practicing With Food . . . . . . . . . . . . . . . . . . . . . . . . 5
Removing Processed Food . . . . . . . . . . . . . . . . . . 5
Techniques for Chopping and Puréeing
with the Metal Blade . . . . . . . . . . . . . . . . . . . . . 5
Techniques for Kneading Yeast Dough with
the Dough Blade . . . . . . . . . . . . . . . . . . . . . . . . 7
Problems and Solutions with Typical Dough . . . . . 9
Preparing Food for Slicing and Shredding . . . . . . 10
Practicing Slicing and Shredding . . . . . . . . . . . . . 10
Removing Sliced or Shredded Food . . . . . . . . . . . 10
Techniques for Slicing and Shredding . . . . . . . . . 10
Slicing Meat and Poultry . . . . . . . . . . . . . . . . . . . . 11
Slicing and Shredding Cheese . . . . . . . . . . . . . . . 11
If You Have a Problem . . . . . . . . . . . . . . . . . . . . . 12
Some Technical Data . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . 12
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
NOTICE
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.

Termékspecifikációk

Márka: Cuisinart
Kategória: Konyhai robotgép
Modell: 14-Cup Food Processor DFP-14N

Szüksége van segítségre?

Ha segítségre van szüksége Cuisinart 14-Cup Food Processor DFP-14N, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Konyhai robotgép Cuisinart

Cuisinart

Cuisinart FP-14DC Útmutató

12 Január 2025
Cuisinart

Cuisinart Mini-Prep Plus DLC-2AFR Útmutató

12 Január 2025
Cuisinart

Cuisinart Core Custom MFP-WB4 Útmutató

8 Január 2025
Cuisinart

Cuisinart CCH-3 Útmutató

2 Szeptember 2024
Cuisinart

Cuisinart Core Custom MFD-4 Útmutató

30 Augusztus 2024
Cuisinart

Cuisinart Continuous Feed CFA-10 Útmutató

25 Augusztus 2024
Cuisinart

Cuisinart FP-7 Útmutató

22 Augusztus 2024
Cuisinart

Cuisinart FP-9 Útmutató

22 Augusztus 2024
Cuisinart

Cuisinart CBT700E Útmutató

18 Augusztus 2024
Cuisinart

Cuisinart DFP-14CPY Útmutató

18 Augusztus 2024

Útmutatók Konyhai robotgép

Legújabb útmutatók Konyhai robotgép

Costway

Costway EP24647 Útmutató

4 Április 2025
Concept

Concept SM3382 Útmutató

31 Március 2025
Reber

Reber 9508 N Útmutató

30 Március 2025
Reber

Reber 9500 N Útmutató

30 Március 2025
Reber

Reber 8683 N Útmutató

30 Március 2025
Ninja

Ninja BN650UK Útmutató

27 Március 2025
KitchenAid

KitchenAid 5KFP0921 Útmutató

27 Március 2025
TriStar

TriStar MX-4804 Útmutató

15 Január 2025
Create

Create CHEF CHOP Útmutató

15 Január 2025
Bredeco

Bredeco BCPM-1200-EXP Útmutató

15 Január 2025