Használati útmutató DayStar Filters QUARK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót DayStar Filters QUARK (16 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 3.8 csillagra

Oldal 1/16
DAYSTAR FILTERS QUARK
Congratulations on your purcha se of a Quark Hydrog en Alpha
“Eyepiece” solar filter. Please read this manual before using the product.
To use the filter, plug in the included power supply, then place the
Quark after your telescope’s diagonal and insert an eyepiece or
camera in the rear of the lter. Turn the knob to point straight away
from the light. When the light turns green in about 5-10 minutes
your viewing experience can begin.
To prevent damage, we recommend using an Energy Rejection Filter on
telescopes of 80mm aperture or more, or when tra cking the Sun for long
periods. This can be a UV/IR cut filter mounted before the diagonal, or a
full aperture red or yellow glass ERF mounted in front of the telescope.
Warnings:
Do not disassemble the filter, the bl ocking element is separated from the
etalon and the complete ssembly must be used together for safe viewing.
Do n ot po wer the filter from a computer or cell phone charger as the
Quark requires a high current power supply (> 1.5A) for operation.
For assistance:
Call: 1 (866) 680-6563
Email: servi ce@daystarfilters.com
Visit: http://www.da ystarfilters.com

Termékspecifikációk

Márka: DayStar Filters
Kategória: nincs kategorizálva
Modell: QUARK

Szüksége van segítségre?

Ha segítségre van szüksége DayStar Filters QUARK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek