Használati útmutató Dormakaba RCI F1119

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dormakaba RCI F1119 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.0 csillagra

I N S T A L L A T I O N

© 2015 RutheRfoRd ContRols Int’l | A doRMA GRoup CoMpAny

www.rutherfordcontrols.com • Phone: 1.800.265.6630 • fax: 1.800.482.9795 • e-mail: sales@rutherfordcontrols.com

When installing an electric strike on an inactive door of a set of double doors, it can be treated the same as a frame installation in most situations. For

more information contact the Technical Service Department at 1-800-265-6630 or 519-621-7651.

Fire labeled heavy-duty electric strike

F1119

isf1119 Pcn14079

r06/15Gr-1

INSTRUCTIONS

1. To determine if the Strike Shim positions need adjustment, measure dimension “R” (see Figure 1) from the center to the edge

of the latch. When necessary rearrange Strike Shims according to the chart below. The “shipped as default” positions are

illustrated in Figure 2.

SHIM PLACEMENT CHART

Note:Shims consist of two thin and one thick. Install with the indicated hardware per the appropriate measurement R range.

Shipped as Default

Figure #1Figure #2

S1 S2

“R” distance

from center to

edge of latch

“R” distance from

center to edge of latch

Deadlock

Trigger

Deadlock

Trigger

Mortise LockCylindrical Lock

Measurement “R” “S1” Shims “S1” Screws “S2” Shims “S2” Screws

5/16” (8.2mm) or Less None M4 x 10mm 1 thick, 2 thin M4 x 10mm

5/16” - 3/8”, (8.2 - 9.7mm) 1 thin M4 x 10mm 1 thick, 1 thin M4 x 10mm

3/8” - 7/16”, (9.7 - 10.7mm) 1 thick M4 x 10mm 2 thin M4 x 10mm

7/16” - 1/2”, (10.7 - 12.2mm) 1 thick, 1 thin M4 x 14mm 1 thin M4 x 10mm

1/2” - 9/16” (12.2 - 13.7mm) 1 thick, 2 thin M4 x 14mm none none

Termékspecifikációk