Használati útmutató EC Line EC-PM-7645II

EC Line nyomtató EC-PM-7645II

Olvassa el alább 📖 a magyar nyelvű használati útmutatót EC Line EC-PM-7645II (6 oldal) a nyomtató kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 3.7 csillagra

Oldal 1/6
Specification
EC-7645 XX
IMPACT DOT-MATRIX RECEIPT PRINTER
Connection
a. Connect the adapter cable to power connector of the printer.
b. Connect the interface cable to the connector on the rear panel of the printer.
c. Connect the cash drawer’s RJ-11 jack to the connector on the rear panel.
Installation of Paper Roll and Ink Ribbon
Please install after turn on the printer with indicators are on.
a. Open the top cover
b. Install the paper roll as the picture showing direction
c. Insert the end of the bottom paper into the paper take-up spool; be sure that the paper
is aligned with the spool’s flange so that the paper is taken up by the spool.
d. Cut redundant paper by the cutter.
e. Open the printer’s cover, turn the knob five or six times in the direction of the arrow,
insert the ink ribbon, and push the ribbon cassette down until it clicks.
A
B C
Set Print Mode (DIP Switch)
Set print mode by the DIP Switch, such as Black mark, Cutter, Language, Beep, Density,
Speed mode
a
b
c
d
e

Termékspecifikációk

Márka: EC Line
Kategória: nyomtató
Modell: EC-PM-7645II

Szüksége van segítségre?

Ha segítségre van szüksége EC Line EC-PM-7645II, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek