Használati útmutató Fisher & Paykel ADDW24TPX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fisher & Paykel ADDW24TPX (2 oldal) a mosogatógép kategóriában. Ezt az útmutatót 18 ember találta hasznosnak.

/ 2 PDF

INSTALLATION GUIDE

Accessory door panels

DISHWASHER DOOR PANEL INSTALLATION

431328A 02.23 US CA

Install handle as per handle

installation guidance.

1

SAFETY & WARNINGS

Ensure a 1/16” (2 minimum ventilation gap below mm)

the door is maintained.

Ensure all packaging is removed and disposed

obly.f responsi2

3

Secure the sliding

bracket and top as

shown with 3/16

x 1/2” (4 x 13mm)

screws.

Ensure ratchet is

correctly oriented,

allowing the door to

be adjusted freely.

Hang door panel.

Secure door panel by replacing

four screws along the top edge of

inner door with M3 x 1 1/4” (M3 x

31mm) screws.

6

7

8

!0

Secure door panel by replacing

four screws along the sides with

1/8 x 1 1/2” (3.9 x 38mm) screws.

Cut the exit vent as shown.

Check door balance. Refer to

installation guide for details.

For more information, visit www.fisherpaykel.com

!WARNING!

Electric Shock Hazard

Failure to follow this advice may result in

electrical shock or death.

• Read and follow the safety and warnings before

operating this appliance.

COMPONENTS REQUIRED

Slider (1)3/16 x 1/2” (4 x

13mm) screws (4)

4

Align door panel by sliding the

accessory door until the top of

the door panel sits above the top

of the control panel.

!WARNING!

Cut Hazard

Failure to use caution could result in injury.

• Take care: some edges may be sharp.

Supplied with appliance

1/8 x 1 1/2” (3.9 x

38mm) screws (4)

1/8 x 7/16” (3.5 x

11mm) screws (2)

Exit vent (1)

Supplied with door kit

Accessory panel (1)M3 x 1 1/4” (M3 x

31mm) screws (4)

Not supplied

9Slot the exit vent into the product

and secure using two 1/8 x 7/16”

(3.5 x 11mm) screws.

Handle (1)

7

Remove the four screws along

the top of the inner door.

Remove the four screws on the

sides of the inner door.

5

Termékspecifikációk