Használati útmutató Fluke SureGrip 80PK-25

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke SureGrip 80PK-25 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 27 ember találta hasznosnak.

®

80PK-25

SureGripTM Piercing

Temperature Probe

Instruction Sheet

XWWarning

To avoid electrical shock, do not use this

probe when voltages exceeding 24 V ac rms

or 60 V dc are present. The probe tip is

electronically connected to the output

terminals.

Introduction

The 80PK-25 SureGripTM Piercing Temperature Probe is

designed for use in liquids, gels, soft, and semi-hard

materials. The probe is made of 316 stainless steel, which

is suitable for food service use. The thermocouple junction

of the probe is protected from tip to handle by the stainless

steel sheath. The 40-inch (1-meter) cable is terminated

with a Type K miniature thermocouple connector with

0.792-mm (.312-inch) pin spacing. The 80PK-25 can be

used with any temperature-measuring instrument that is

designed to accept Type K thermocouples and has a

miniature connector input.

Specifications

Type

K, Standard grade Ni-Cr vs Ni-Al (Chromel vs Alumel)

Measurement Range of Stainless Steel Probe

-40 °C to 350 °C (-40 °F to 662 °F)

Accuracy

(With respect to ANSI MC96.1 Standard Limits of Error)

Note

All error calculations should be done in °C, then

scaled to °F.

Range Accuracy

(% of reading)

-40 °C to 0 °C

(-40 °F to 32 °F)

±2.2 °C

0 °C to 350 °C

(32 °F to 662 °F)

±1.1 °C

November 2004 Rev.2, 10/09

© 2004-2009 Fluke Corporation. All rights reserved.

All product names are trademarks of their respective companies

Termékspecifikációk