Használati útmutató Fredrick Ramond FR45601BNI

Fredrick Ramond Lampa FR45601BNI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fredrick Ramond FR45601BNI (3 oldal) a Lampa kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
FR45601BNI/FBZ
MIME
ASSEMBLY IN STRUCTIONS
Assembly of this fixture will be accomplished by first assembling the main body,
installing the mounting hardware to the junction box, hanging the fixture and then
installing the shade and crystals.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
1
STEP 2 Refer to Hanging Instruction Sheet to hang fixture. Then refer[FRIS19-41 ]
back to this sheet to continue installation of this fixture.
STEP 3
1
2
3
[DRAWING 1]
Bulbs: 3-60W CAND. Replacement Parts: SHADE: R45601SH (BNI FINISH),
R455601AMBSH ( fbz FINISH),
R45602CRY-A
01.01.13
3d
ce
1b
e
4
2
5
After unpacking fixture main body can be installed prior to attaching the shade.
Take shade and line up holes in tabs with the holes in (1) (d)
end of arms . Shade tab shold be on top of the arm -see . (b) Drawing 1
Slip flat head screw (2) through hole in arm and hole in shade
tab. Thread barrel knob onto end of screw to secure shade.(3) (2)
Repeat process with the remaining arms.
Thread finial (4) onto threaded tube (t) found at the bottom of the fixture.
Attach crystals (5) at point (e) as indicated in .Drawing 1
e
5
t
4

Termékspecifikációk

Márka: Fredrick Ramond
Kategória: Lampa
Modell: FR45601BNI

Szüksége van segítségre?

Ha segítségre van szüksége Fredrick Ramond FR45601BNI, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek