Használati útmutató Golden Lighting Madera 1821-M1L BI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Golden Lighting Madera 1821-M1L BI (3 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.2 csillagra

CanopyWire ConnectorsHex Nut

1ea @5-1/2"X1-1/2" 3ea P4 Orange

Chain

Junction Box

Screw

Spring Washer

1ea 6ft x3.8mm2ea 8/32" x 1"1ea @15 x 2mm

Chain ConnectorNipple

2ea @4.2X50mm 1ea @3/8 x 40mm x 5mm1ea @3/8 x 50mm

Mounting Strap

w/ ground screw

1ea 3/4"X4"

Part NeededQuantity

Part NeededQuantity

Reason why( missing, scratched, broken glass, bent, bad finish)

Comments

Fig. 1

For Customer Service, contact the place of purchase to arrange for replacement parts.

PARTS & ASSEMBLY SHEET

1821-M1L BI

Read and review installation instruction sheet before

assembling the fixture.

F

IXTURE

A

SSEMBLY

I

NSTRUCTIONS

This fixture assembled PO:__________ Date: ________

Fixture Name: Madera 1821-M1L BI

Canopy Loop

with Collar

ASSEMBLING THE FIXTURE (Fig. 1)

* the glass shade should come with the metal cage already

attached.

1. Place each small screw (N) and washer (P) through

holes on inside of glass shade (O), add another washer (P)

on the outside of glass shade.

2. Lower metal cage (M) over glass shade, lining the holes

up with the screws and turn the small screw until tight to

secure the cage to the glass shade.

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or

damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

to be filled out by retailer

2ea @3/8 x 3mm

M

N

O

P

P

Termékspecifikációk