Használati útmutató GoldenEar Technology SuperSwivel

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GoldenEar Technology SuperSwivel (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.3 csillagra

The SuperSwivel™ is intended for use with GoldenEar Technology SuperSat®

Speakers, 3D Array® Soundbars, or similar loudspeakers with 1⁄4-20 threaded

receptacles. Each bracket can support up to 11 lbs (5.0 kg). Do not use

a single bracket with any speaker weighing more than 11 lbs (5.0 kg). Use

one (1) SuperSwivel™ brackets with the and (SuperSat 3, 3C, 5060for

vertical mounting). Use two (2) SuperSwivel™ brackets with the SuperSat

50C, 60C3D Array and the Soundbars.

GoldenEar Technology

'

P.O. Box 410

'

Stevenson, MD 21153

'

410-998-9134

'

www.goldenear.com

Step 2

Fasten the ball pivot to the 1⁄4-20 threaded

receptacle on the back of the loudspeaker.

Tighten the ball pivot nut using a 7⁄16"(11mm)

wrench. (NOTE: For Mounting SuperSat 50 and

60 in vertical orientation with one SuperSwivel,

use the upper insert.)

ball pivot nut

'

SuperSwivel™

Universal Mounting BracketUser’s Guide

ball pivot

clamping screw

Step 1

Loosen the with Allen clamping screw supplied (hex)

wrench slides out. careful until the ball pivot Be not

to fully rthe hex emove clamping screw.

Step 3

1. Using the wall plate as a template, mark the two screw-hole positions

on the wall where you wish to mount the bracket.

2. Mounting holes in the bracket will t #10 screws (not included). Secure

the bracket to the wall using a minimum of two screws.

Installation

Termékspecifikációk