Használati útmutató Havis C-DMM-120

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Havis C-DMM-120 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.2 csillagra

C-DMM-120_INST_7-12 rev 9-13

INSTALLATION INSTRUCTIONS

C-DMM-120

2011-2017 FORD EXPLORER (RETAIL)

SWING-OUT DASH MONITOR MOUNT

***Does NOT work in the Ford Interceptor Utility vehicle***

Always!

Read all instructions before installing any Havis, Inc. products.

Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!

Use hardware provided with install kit

The Dash Monitor Mount bracket system requires two or three main parts that are sold

separately. See web site Monitor Configurator for more detailed bracket information.

http://www.havis.com/monitor_mounts.htm

1 - Vehicle Specific dash mount bracket. (C-DMM-123)

1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)

1 - Offset adaptor bracket. (C-MM-301)

The C-MM-301 offset adaptor goes between the C-DMM-123 and C-MM-2XX.

It may not be required in some applications.

Docking stations for tablet applications can be bolted directly to C-DMM without adaptor. Offset

adaptor C-MM-303 is available if additional positioning options are desired for docking station.

TOOLS REQUIRED:

• Ratchet Wrench Air Saw or Plastic cutting tool

• Socket Set Dash panel removal tool

• Open End Wrench - 7/16” File

• Phillips Screwdriver

HARDWARE and PARTS:

QTY: DESCRIPTION: PART #:

1 Main Frame Assembly CM004267

1 Upper Support Bracket Driver Side CM004263

1 Upper Support Bracket Passenger Side CM004264

1 Lower Support Bracket Driver Side CM004265

1 Lower Support Bracket Passenger Side CM004266

4 1/4" Serrated Flange Hex Nut GSM30023

4 # 10 x 1/2" Phillips Pan head machine screw GSM33118

4 # 10 Star Washer GSM31034

1 Monitor Adapter Hardware Varies (monitor specific)

Note: The swing door utilizes a gas spring to assist in opening the door and to eliminate the possibility of it

slamming shut. If additional damping is desired because of heavier equipment, an optional stronger gas spring is

available under Part Number CM86662-30 (sold separately)

Installer must change out gas spring as needed

Termékspecifikációk