Használati útmutató Hilti TE 500-AVR SDS
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hilti TE 500-AVR SDS (20 oldal) a Hamer kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/20

TE 500-AVR English
Printed: 02.02.2018 | Doc-Nr: PUB / 5367085 / 000 / 01

Printed: 02.02.2018 | Doc-Nr: PUB / 5367085 / 000 / 01

English 1
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of signs used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potential hazard that could lead to serious personal injury or
fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to minor personal
injury or damage to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use
Instructions for use and other useful information
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3 Explanation of signs used
1.3.1 Symbols on the product
The following symbols are used on the product:
Chiseling
Chisel positioning
Protection class II (double-insulated)
Rated speed under no load
Wear protective gloves
1.4 Product information
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
Printed: 02.02.2018 | Doc-Nr: PUB / 5367085 / 000 / 01
Termékspecifikációk
Márka: | Hilti |
Kategória: | Hamer |
Modell: | TE 500-AVR SDS |
Szüksége van segítségre?
Ha segítségre van szüksége Hilti TE 500-AVR SDS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Hamer Hilti

30 Szeptember 2024

30 Augusztus 2024

23 Augusztus 2024

8 Augusztus 2024

3 Augusztus 2024

3 Augusztus 2024

1 Augusztus 2024

31 Július 2024

28 Július 2024

25 Július 2024
Útmutatók Hamer
- Hamer Milwaukee
- Hamer Parkside
- Hamer Bosch
- Hamer AEG
- Hamer Einhell
- Hamer Ozito
- Hamer Makita
- Hamer Scheppach
- Hamer Ergotools Pattfield
- Hamer Güde
- Hamer Hitachi
- Hamer Proviel
- Hamer Black & Decker
- Hamer Global
- Hamer Fieldmann
- Hamer GO/ON
- Hamer PowerPlus
- Hamer Metabo
- Hamer Powerfix
- Hamer Bavaria
- Hamer RYOBI
- Hamer HiKOKI
- Hamer McKenzie
- Hamer Trotec
- Hamer Taurus
- Hamer Bavaria By Einhell
- Hamer Porter-Cable
- Hamer DeWalt
- Hamer Wiha
- Hamer Stanley
- Hamer Alpha Tools
- Hamer Cocraft
- Hamer Craftsman
- Hamer Ferm
- Hamer Skil
- Hamer Ronix
- Hamer Power Craft
- Hamer Topcraft
- Hamer Anova
- Hamer King Craft
- Hamer Full Boar
- Hamer Toolson
- Hamer Robust
- Hamer Einhell Bavaria
- Hamer MyTool
- Hamer Prowork
- Hamer XU1
- Hamer Workzone Titanium
- Hamer Kraftronic
Legújabb útmutatók Hamer

2 Április 2025

2 Április 2025

2 Április 2025

2 Április 2025

30 Március 2025

30 Március 2025

30 Március 2025

29 Március 2025

29 Március 2025

27 Március 2025