Használati útmutató Hive Thermostat Stand

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hive Thermostat Stand (2 oldal) a okos otthon kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Remember: If the thermostat is positioned in the same room

as a radiator controlled by a thermostatic radiator valve (TRV)

this may prevent the thermostat from being able to reach its

target temperature and may result in the central heating being

permanently on.

© 2017 Centrica Connected Home Limited.

Registered in England (No. 5782908).

Registered office: Millstream, Maidenhead Road,

Windsor, Berkshire SL4 5GD. All rights reserved.

Choosing a location for your thermostat

Aim for around 1–1.5m from the floor and away from heat sources

such as radiators and direct sunlight. To make accurate temperature

readings, your thermostat needs a free flow of air so please ensure

you place in an area not covered by curtains or similar objects.

How to fit the Hive thermostat to yourstand

1Remove the back plate of

the thermostat by pressing

the lever at the bottom and

pulling away from the front

of the device.

2Hook the thermostat

onto the stand back

plate and click it in place.

Press tab to open

UG70007300517

Fitting instructions overleaf

hivehome.com

Termékspecifikációk