Használati útmutató Honeywell 32003796-001

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Honeywell 32003796-001 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/8
® U.S. Registered Trademark Patents Pending
Copyright © 2004 Honeywell International Inc. • • All Rights Reserved
INSTALLATION INSTRUCTIONS
69-1721EFS
32003796-001
Cover Plate
APPLICATION
The 32003796-001Cover Plate is used to cover marks
left on the wall by the old thermostat. It can be used with
the VisionPRO™ TH8000 Series Thermostats.
Installation
When Installing this Product...
1. Read these instructions carefully.
2. Installer must be a trained, experienced service
technician.
CAUTION
Electrical Hazard.
Can cause electrical shock or equipment
damage.
Disconnect power supply before starting
installation.
Mounting
The Cover Plate can be mounted on the wall when
mounting with a TH8000 Series Thermostat. See Fig. 1
for dimensions.
1. Use Cover Plate to mark and drill holes; install
anchors, if necessary.
2. Pull wire through Cover Plate and thermostat
wallplate wiring opening.
3. Align Cover Plate and thermostat wallplate with the
holes. Insert the screws included with the
thermostat; then level and tighten the screws. See
Fig. 2.
Fig. 1. 32003796-001 Cover Plate dimensions.
7-7/8 (200)
3-5/16 (84)
3-5/16
(84)
M22139
5-1/2
(140)

Termékspecifikációk

Márka: Honeywell
Kategória: nincs kategorizálva
Modell: 32003796-001

Szüksége van segítségre?

Ha segítségre van szüksége Honeywell 32003796-001, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek