Használati útmutató IFM E30108

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E30108 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/3
Installation Instructions
Welding adapter
E30108
704097 / 00 11 / 2014
UK
2
Installation







1. Weld in the adapter.
The adapter should only be welded by qualified personnel.
Use a welding method which is suitable for the material (stainless
steel, material no. 316S12).
Make sure that the adapter does not warp.
Let the adapter cool down.
2. Grease the following parts: nut (1), clamping ring (2), thread and inner hole of
the adapter (3).
3. Position the clamping ring.
Chamfered end (4) into the adapter.
4. Screw in the nut.
5. Position the sensor (5).
6. Tighten the nut manually and mark its position with a line (6).
7. Adjust the sensor to the required installation depth. Hold it and tighten the nut
by 1 full turn with a tool.
Repeated mounting
You can remove the sensor e.g. to clean the tip. Then insert the sensor again and
firmly tighten the nut.
3
UK
1
2 3 4
A
A: Grease
5 6 7

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: E30108

Szüksége van segítségre?

Ha segítségre van szüksége IFM E30108, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek