Használati útmutató IFM IM5118

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM IM5118 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 3.6 csillagra

Oldal 1/4
Installation instructions
Inductive proximity switch
IMC flush
704077 / 00 07 / 2010
UK
UK
UK
UKUK
UK
2
1 Function and Features
This proximity switch detects metals without contact and indicates their presence
by providing a switched signal. The nominal sensing range (Sn) can be seen in the
type designation on the type label on the unit; operating distance (Sa) 0 ... 0.81
x Sn. (Values based on standard measurement with mild steel; a shorter sensing
range for other metals).
2 Installation
Screw the proximity switch to a firm base.
Protect it against loosening in case of high mechanical stress.
Flush mountable (fig. 1 and 2).
When mounted in metal, the metal must not protrude over the sensing face.
Open space around the sensing face when mounted in metal: fig. 3
Minimum distances when mounting several switches of the same type: fig. 4
1 2
3
3 x Sn
4
8 x Sn
a aa
3
UK
3 Alignment of the sensing face
On delivery, the sensing face is facing the front (fig. 5). The sensing face can be
turned to the side (fig. 8) by loosening the fixing screw and turning the sensor
block (fig. 5-8).
5 6
7 8
4 Electrical connection
Disconnect power.
Connect the unit according to the indications on the type label.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: IM5118

Szüksége van segítségre?

Ha segítségre van szüksége IFM IM5118, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek