Használati útmutató IFM JN2201

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM JN2201 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
Installation instructions
Inclination sensor JN
JN2200
JN2201
80237500/00 04/2016
UK
2
1 Functions and features
The 2-axis analogue/binary inclination sensor with IO-Link interface enables angle
levelling and position detection of machines and installations.
Typical applications are, for example, the position detection of access platforms,
levelling of mobile cranes or monitoring of wind turbines.
2-axis inclination sensors with a measuring range of:
JN2200: ±180°
JN2201: ±45°
2 Symbols used
Instruction
Important note
Non-compliance may result in malfunction or interference.
3 Installation
Disconnect from power before installation.
3.1 Fixing
Fasten the device using 4 M5 screws on a flat surface.
Screw material: steel or stainless steel.
3.2 Mounting surface
The housing must not be exposed to any torsional forces or mechanical stress.
Use compensating elements if there is no flat mounting surface available.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.
Disconnect the installation from power and connect the unit.
3
UK
The inclination sensors are fitted with two round 4-pole M12 connectors (class A)
in accordance with IEC 60947-5-2. The M12 connectors are mechanically A-coded
in accordance with IEC 61076-2-101.
 
1: L+ 24 V DC (+Ub-D)
2: OUT2 switching output 2
3: L- mass (GND)
4: OUT1 switching output 1 or IO-Link
M12 connector (left)
 
1: L+ 24 V DC (+Ub-A)
2: A2 analogue output 2
3: L- mass (GND)
4: A1 analogue output 1
M12 connector (right)
5 IO-Link
General information
This unit has an IO-Link communication interface (via pin 4) which requires an IO-
Link-capable module (IO-Link master) for operation.
The IO-Link interface enables direct access to process and diagnostic data.
Communication via a point-to-point connection is possible with USB adapter cable.
You will find the IODDs and parameter setting tools necessary for the configuration
of the IO-Link unit at www.ifm.com.
6 Technical data, approvals/standards
Detailed manuals, technical data, EC declaration of conformity, approvals and
further information can be found at www.ifm.com.
7 Maintenance, repair and disposal
The unit is maintenance-free.
Dispose of the unit in accordance with the national environmental regulations.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: JN2201

Szüksége van segítségre?

Ha segítségre van szüksége IFM JN2201, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM E40581 Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva