Használati útmutató JBL SUB150P

JBL mélynyomó SUB150P

Olvassa el alább 📖 a magyar nyelvű használati útmutatót JBL SUB150P (4 oldal) a mélynyomó kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
1X
1X
1X
Included Items
Your new JBL® SUB150P 300-watt powered subwoofer incorpo-
rates a 10" (250mm) PolyPlas™ cone transducer and a built-in
high-performance 300-watt (RMS) amplifier that deliver the power-
ful, dynamic and accurate low-frequency performance that makes
your film soundtracks and music come alive. And with line-level
and LFE inputs, adjustable crossover and phase controls and
automatic turn on/off, the SUB150P is also simple to connect and
set up.
We’re confident that this JBL subwoofer will provide every note of
enjoyment that you expect – and that when you think about pur-
chasing additional audio equipment for your home, car or office,
you will once again choose JBL products.
This quick-start guide contains all the information you need to set
up, connect and adjust your new subwoofer. For more in-depth
information, go to our Web site: www.jbl.com.
thank You For choosIng thIs JBl® Product
suB150P
300-Watt, 10" (250mm) Powered Subwoofer
quIck-start guIde
2
Phase Switch: This switch determines whether the subwoofer transduc-
er's piston-like action moves in and out in phase with the main speakers.
If the subwoofer were to play out of phase with the main speakers, the
sound waves from the main speakers could partially cancel out the sound
waves from the subwoofer, reducing bass performance and sonic impact.
This phenomenon depends in part on the placement of all the speakers
relative to the listening position and to each other in the room.
Input Mode Switch: When this switch is in the “Normal” setting, the input
signal from both Line In connectors is routed through the subwoofer's
built-in low-pass crossover network. When the switch is in the “LFE” set-
ting, the input signal from the LFE Input connector bypasses the subwoof-
er's built-in crossover network.
Volume Control: Use this control to adjust the subwoofer’s volume. Turn
the knob clockwise to increase the volume; turn the knob counterclock-
wise to decrease the volume.
Crossover Control: This control determines the highest frequency at
which the subwoofer reproduces sounds. The higher you set the Cross-
over control, the higher in frequency the subwoofer will operate and the
more its bass will “overlap” that of the satellite speakers. This adjust-
ment helps achieve a smooth transition of bass frequencies between the
subwoofer and the satellites for a variety of different rooms and subwoofer
locations.
NOTE: The Crossover Control functions only when the Input Mode switch
is in the “Normal” setting.
On/Standby LED: When the Power switch is in the “On” position, this
LED indicates whether the subwoofer is in the On or Standby state:
• When the LED glows green, the subwoofer is turned on.
• When the LED glows red, the subwoofer is in the Standby mode.
Line In/LFE Input Connectors:
• When you’re connecting the subwoofer to the dedicated subwoofer
output of a receiver/processor that has its own low-pass crossover
network, use the LFE Input connector and set the Input Mode switch
in the “LFE” position.
• When you're connecting the subwoofer to the preamp or subwoofer
outputs of a receiver/processor that does not have its own low-pass
crossover network, use both Line In connectors and set the Input
Mode switch in the “Normal” position. If your receiver/processor only
has one subwoofer output you can use either Line In connector.
Power Switch: Set this switch in the “On” position to turn the subwoofer
on. The subwoofer will then be in the Standby mode. It will automatically
turn On when an audio signal is detected at its inputs, and will return to the
Standby mode when no audio signal is detected its inputs after approxi-
mately 10 minutes.
If you will be away from home, or will not be using the subwoofer for an
extended period, set this switch in the “Off” position to conserve energy.
Power Cord Connector: After you have made and verified the subwoof-
er’s input connections, plug the female end of the supplied IEC power cord
into the subwoofer’s Power Cord connector, and plug the other end of the
power cord into an active, electrical outlet for proper opera-unswitched
tion of the subwoofer. plug the power cord into the accessory DO NOT
outlets found on some audio components.
suBwooFer rear-Panel controls and connectIons
2053 23
No rt hr id ge , CA USA
De sign ed and e n gi ne er ed i n USA
Made in P.R.C
SUB150P
Phase Switch
Input Mode Switch
Volume Control
Crossover Control
On/Standby LED
Power Switch
Line-Level/LFE
Input Connectors
Power Cord
Connector
3
www.jbl.com
English
PlacIng the suBwooFer
connectIng the suBwooFer
The performance of a subwoofer is directly related to its placement in the listening room
and its physical position relative to the other speakers in the system.
While it is true that in general our ears do not hear directional sounds at the low
frequencies where subwoofers operate, when installing a subwoofer within the limited
confines of a room, the reflections, standing waves and absorptions generated within
the room will strongly influence the performance of any subwoofer system. As a result,
the specific location of the subwoofer in the room does become important to the
amount and quality of bass that is produced.
For example, placing the subwoofer next to a wall generally will increase the amount of
bass in the room; placing it in a corner ( ) generally will maximize amount of bass in the 1
room. However, corner placement can also increase the destructive effect of standing
waves on bass performance. This effect can vary depending on the listening position
– some listening positions may yield very good results while others may have far too
much (or too little) bass at certain frequencies.
In many rooms, placing the subwoofer along the same plane as the left and right speak-
ers ( ) can produce the best integration between the sound of the subwoofer and that 2
of the left and right speakers. In some rooms, the best performance could even result
from placing the subwoofer behind the listening position ( ). 3
We strongly recommend that you experiment with placement before choosing a final
location for your subwoofer. One way you can determine the best location for the sub-
woofer is by temporarily placing it in the listening position and playing music with strong
bass content. Move around to various locations in the room while the system is playing
(putting your ears where the subwoofer would be placed), and listen until you find the
location where the bass performance is best. Place the subwoofer in that location.
Front Left
Speaker
TV
Center
Speaker Front Right
Speaker
Surround Left
Speaker
Surround Right
Speaker
1.
2.
3.
TO A RECEIVER OR PREAMP/PROCESSOR WITH A LOW-PASS FILTERED DEDICATED SUBWOOFER OUTPUT
TO A RECEIVER OR PREAMP/PROCESSOR WITH PREAMP OUTPUTS
SUBWOOFER
LFE OUT
205323
No rthridg e, CA USA
Designed an d engi neere d in USA
Made in P.R.C
SUB150P
PREAMP
OUTPUT
205323
No rthridg e, CA USA
Designed an d engi neere d in USA
Made in P.R.C
SUB150P
Receiver/Processor
Receiver/Processor
Set Input Mode
Switch to “LFE”
Set Input Mode
Switch to “Normal”

Termékspecifikációk

Márka: JBL
Kategória: mélynyomó
Modell: SUB150P

Szüksége van segítségre?

Ha segítségre van szüksége JBL SUB150P, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó JBL

JBL

JBL ARC SUB Útmutató

1 Január 2025
JBL

JBL SSW-4 Útmutató

27 December 2024
JBL

JBL SSW-2 Útmutató

27 December 2024
JBL

JBL 800.4GTi Útmutató

26 December 2024
JBL

JBL ARC SUB10 Útmutató

26 December 2024
JBL

JBL Cinema Sound CSS10 Útmutató

26 December 2024
JBL

JBL Grand Touring GTO1212BP Útmutató

26 December 2024
JBL

JBL Grand Touring GTO1214BR Útmutató

26 December 2024
JBL

JBL Cinema Vision CVSUB50 Útmutató

26 December 2024
JBL

JBL Decade DS100 Útmutató

26 December 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025