Használati útmutató Jung ESU230-2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jung ESU230-2 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/4
Key card holder RFID and energy saving unit
23.07.20201 / 40024018702
Key card holder RFID
Ref.-no.: .. CARD RFID ..
Energy saving unit
Ref.-no.: ESU 230-2
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
12
3
4
Fig. 1: Device components
(1) Energy saving unit
(2) Frame
(3) Key card holder RFID
(4) RGB lens
3 Function
Intended use
- Switching of lighting and other loads
- Triggering of external control systems
- Installation in ush-box according to DIN 49073
Product characteristics
- Operation with RFID cards according to ISO/IEC 14443 and ISO/IEC 15693
- 2 make contacts, one of them with congurable run-on time
- Status indication with RGB lens
- Lens is dimming down 30 s after inserting the card
- Run-on time is signalled by RGB lens after removing the card
GB

Termékspecifikációk

Márka: Jung
Kategória: nincs kategorizálva
Modell: ESU230-2

Szüksége van segítségre?

Ha segítségre van szüksége Jung ESU230-2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek