Használati útmutató Jung FM A 5001 M

Jung nincs kategorizálva FM A 5001 M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jung FM A 5001 M (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/10
eNet radio transmitter module
eNet radio transmitter module 1-gang
Art. No. : FM..5001M
eNet radio transmitter module 2-gang
Art. No. : FM..5002M
eNet radio transmitter module 3-gang
Art. No. : FM..5003M
eNet radio transmitter module 4-gang
Art. No. : FM..5004M
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Keep button cells out of reach of children! If button cells are swallowed, get medical help
immediately.
Risk of explosion! Do not throw batteries into fire.
Risk of explosion! Do not recharge batteries.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: 4-gang radio wall transmitter module
(1) Base plate
(2) Fastening screws for the base plate
(3) Design frame
(4) Wall transmitter module
(5) Cover
(6) Fastening screws for the wall transmitter module
1/10
32595513
J0082595513 22.03.2017
(7) Cover kit
(14) Battery holder
3 Function
Intended use
- Radio sensor for transmission of switching, dimming, blind movement and scene
commands
- Operation with radio actuators from the eNet system
Product characteristics
- Display of the actuator status for status poll by a green status LED per channel
- Display of the transmission status by a red transmission LED
- Switch-on brightness of dimmer actuators can be saved.
- Battery-powered device
- Signalling of transmission errors can be switched off
Can be set with eNet server:
- Master dimming function
- Scene All On
- Operation locks
i If settings are changed with the eNet server, operation and signalling could vary from what
is described here.
i The parameter list is in the Internet in the documentation for this device.
Supplementary function with eNet server
- Update of the device software
4 Operation
i When operating with the eNet Server, operation and signalling could vary from what is
described here.
Function of LED in operation
As soon as a button is pressed or released, the transmission LED (9) signals radio
transmission.
- LED lights up for 2 seconds
Then, the status LED (8) signals the actuator status/group status
- LED lights up for 3 seconds:
At least one actuator is switched on, or one Venetian blind is not in the top end position
- LED remains off:
All the actuators are switched off or the blinds are all in the upper end position
i If there is no status message from an actuator, the transmission LED (9) signals a
transmission error. The transmission LED flashes quickly for 5 seconds.
2/10
32595513
J0082595513 22.03.2017
eNet radio transmitter module
Channel assignment of the wall transmitter
Figure 2: Channel assignment of wall transmitter module 1-gang, 2-gang, 3-gang and 4-gang
(8) Status LED, green (one per channel)
(9) Transmission LED, red (one per device)
Operating light
o Switching: Press button for less than 0.4 seconds.
o Dimming: Press the button for longer than 0.4 seconds. The dimming process ends when
the button is released.
o Switching on dimmer actuators at minimum brightness: Press the right button for longer
than 0.4 seconds.
o Switching on dimmer actuators at minimum brightness and dimming to maximum
brightness: Press the left button for longer than 0.4 seconds.
Operating blind
o Moving the Venetian blind: Press the button for longer than 1 second.
o Stopping the Venetian blind or adjusting the slats: Press the button for less than 1 second.
Operating push-button actuator
o Press the left or right button of a channel: The load is switched on for the duration of the
button-press.
i The maximum actuation length is 60 seconds.
Recalling scenes
o Press the scene button briefly.
Actuators switching to the saved scene.
Changing scene
o Press the scene button briefly.
Actuators switching to the saved scene.
o Setting a new scene.
o Press scene button for longer than 4 seconds.
Actuators first switching to the old scene and save the new scene after 4 seconds.
3/10
32595513
J0082595513 22.03.2017
eNet radio transmitter module

Termékspecifikációk

Márka: Jung
Kategória: nincs kategorizálva
Modell: FM A 5001 M

Szüksége van segítségre?

Ha segítségre van szüksége Jung FM A 5001 M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Jung

Jung

Jung SC0081U Útmutató

28 Március 2025
Jung

Jung MBT 2424 Útmutató

28 Március 2025
Jung

Jung NA7 Útmutató

28 Március 2025
Jung

Jung LS 4 AR Útmutató

28 Március 2025
Jung

Jung JVP-SERVER-H2 Útmutató

27 Március 2025
Jung

Jung MALS1133 Útmutató

1 Január 2025
Jung

Jung MAAL1133 Útmutató

15 December 2024
Jung

Jung MAGO1193 Útmutató

10 December 2024
Jung

Jung MAA1193 Útmutató

10 December 2024
Jung

Jung MACD1193WW Útmutató

10 December 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025