Használati útmutató Kramer KT-107-INWL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kramer KT-107-INWL (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.0 csillagra

Oldal 1/4
KT- -INWL 107 Quick Start
P/N:
2900- 301151QS
Rev:
2
KT- -INWL Quick Start Guide 107
This guide helps you install and use your KT-107-INWL for the rst time.
Go to www.kramerav.com/downloads/KT- -INWL107 to download the latest manual and check for updates.
Step 1: Check what’s in the box
KT- -INWL 107 enclosure
4 4x1/2” screws for wood (packed separately)
Outer frame
1 utCardboard c -out template
4 Inner frame M3x8 screws (packed separately
Inner frame
1 Quick start guide
Step 2: Get to know your - -INWL KT 107
The -Wall Kit secures , and Touch Panels safely into a wall (drywall, wood, or KT- -INWL107 In KT-107 -107RB KT -107SKT
concrete).
Step 3: Prepare the surface for installation
For drywall and wooden surfaces:
1. Place the cut-out template (included, use
for drywall and wood installations) over the
surface exactly where you want to install
KT- -INWL107 .
2. Mark the edge inside
(W, H: 19.5cm x 15cm) of the template and
cut an opening in the surface according to
the given dimensions.
Kramer is not responsible for any
damage caused to the surface.
For concrete or block wall surfaces:
Use the Kramer -wall box KT-107-INWB in
(purchased separately) for concrete
installations.
1. Make sure that the prepared opening in
the concrete ts the dimensions of the in-
wall junction box.
2. Insert the into the opening. KT- -INWB107
Make sure to place the ush KT-107-INWB
with the plaster surface.

Termékspecifikációk

Márka: Kramer
Kategória: nincs kategorizálva
Modell: KT-107-INWL

Szüksége van segítségre?

Ha segítségre van szüksége Kramer KT-107-INWL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek