Használati útmutató LevelOne FEP-0931

LevelOne kapcsoló FEP-0931

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LevelOne FEP-0931 (17 oldal) a kapcsoló kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/17
FEP-0931
Quick Installation Guide
English
Deutsch
Français
Español
Nederlands
Dansk
Italiano
Ελληνικά
Português
Svenska
Slovenščina
繁體中文
한국어
Русский
Polski
x 1
AC/DC adapter 1x
x 1AC power line
Package Content
Package Content
Package Content
Package ContentPackage Content
F 9 1EP-0 3
LED
Status
Explanation
P WR
Green
Lit when Power is availabl e.
POE
P1~P8
Yellow
Lit the connected port(s) is/are PSE when
starts to supply power
OFF
O the connected port(s) is/are PSE when
stop power supply
L/A
P1~P9
Green
Lit when there is/are network device(s)
connect the corresponding port(s)
Blink
Blink when the corresponding ports (are) is
transmitting data ows
SPD
P9
Green
Data rate is 100Mbps
OFF
Data rate is 10Mbps
Two bits
DIP
switch
Auto-mode
Automatically adjust the network
transmission rate according to the length of
network cable.
10M
Forced downlink port rate is 10M Support
250 meters long distance transmission
VLAN&
Auto-mode
Automatically adjust the network
transmission rate according to the length of
network cable. Support downlink port
isolation, only uplink port communication
VLAN&
10M
Forced downlink port rate is 10M,Support
downlink port isolation and 250 meters
long distance transmission, only uplink port
communication
LED Indicator
ENGLISH
Installation
Connecting Equipment
Step1. Inspect the Power Adapter carefully, and make
sure that it is properly connected to a power
source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch
by using Ethernet cable. (e.g. Cat-5 e)

Termékspecifikációk

Márka: LevelOne
Kategória: kapcsoló
Modell: FEP-0931

Szüksége van segítségre?

Ha segítségre van szüksége LevelOne FEP-0931, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek