Használati útmutató Lincoln MKZ (2010)

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lincoln MKZ (2010) (13 oldal) a autó kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 5.0 csillagra

ErasingtheCar2UHome AutomationSystembuttons姞

Note: The system allows for three devices to be programmed. If you

need to change or replace any of the three devices after it has been

initially programmed, it will be necessary to erase the current settings

using the procedure below and then reprogramming all of the devices

being used.

To erase programming on the Car2Usystem (individual buttons cannot威

be erased), use the following procedure:

1. Firmly press the two outside Car2Usystem威

buttons simultaneously for approximately

20 seconds until the indicator lights beginto

blinkrapidly.Theindicatorlights arelocated

directly above the buttons.

2. Oncethe indicator lights beginto blink,

release your fingers from the buttons. The

codes for allbuttons areerased.

If you sell your vehicleequipped withthe Car2Usystem, it is威

recommended that you erase the programming for security reasons.

FCC and RSS-210 Industry CanadaCompliance

TheCar2Usystem complies withPart 15oftheFCCrules and with威

RSS-210 of Industry Canada. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2)

This device must accept any interference received including interference

that may cause undesired operation.

Changes and modifications to the Car2Usystem transmitter by other威

than an authorized service facility could void authorization to use the

equipment.

6

Termékspecifikációk