Használati útmutató LYYT DIY-DW120

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LYYT DIY-DW120 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
DIY LED TAPE KIT CW/WW
153.739UK User Manual
DIY LED TAPE KIT 5m Cool white & Warm White
Introduction:
Thank you for purchasing the Lyyt DIY CW/WW LED Tape. LED tape is ideal for use on the underside of a counter tops, shelves, cupboards,
around window frames or in an alcove of a ceiling to name just a few examples.
Before starting please ensure that you have read this instruction leaflet carefully.
If you are unsure about anything please have the tape installed by a competent installer.
Contents:
1 x 5m reel of CW/WW LED tape
1 x UK power adaptor
1 x Control Box with IR remote handset
Possible required tools: Scissors, Craft knife, Soldering iron and solder, 4 core DC wire and heat shrink tube.
Step 1: Preparation
Ensure the surface you are attaching to is clear of dust and dirt. Clean thoroughly and leave to dry before fitting the tape.
Step 2: Connecting IR Controller:
Connect the 4pin connector to the control box and then to the LED tape (FIG 1). Plug in the power supply and use the IR remote control to select
the various functions (Fig 2).
Unravel the tape to check that all the LEDs are functioning correctly. If there are any faults return to your retailer without delay.
FIG 1:
FIG 2:
IR remote function
The remote control has altogether 16 different colour temperatures to choose from, with other function keys as shown below:
* Fade mode: Press once for fade on both colours. Press twice for fade on cool white. Press 3 times for fade on warm whi . te

Termékspecifikációk

Márka: LYYT
Kategória: nincs kategorizálva
Modell: DIY-DW120

Szüksége van segítségre?

Ha segítségre van szüksége LYYT DIY-DW120, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek