Használati útmutató Meiko FV 40.2 G

Meiko mosogatógép FV 40.2 G

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Meiko FV 40.2 G (20 oldal) a mosogatógép kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
Rev. 9/10
MEIKO • 1349 Heil Quaker Blvd. • La Vergne, TN 37086 • Phone: (615) 399-6600 • (800) 55-MEIKO • Fax: (615) 399-6620
Undercounter High Temperature Sanitizing Glasswasher
(USA Version)
OWNER’S INSTALLATION, OPERATION AND
MAINTENANCE MANUAL
MODEL FV 40.2 G
Page 2
T ABLE OF CONTENTS
THE MEIKO MODEL FV 40.2 G DISHWASHER HAS BEEN DESIGNED
EXCLUSIVELY FOR THE WASHING OF GLASSWARE, DISHES, CUTLERY
AND KITCHEN UTENSILS IN A COMMERCIAL OR INSTITUTIONAL SETTING
AND MUST NOT BE USED FOR ANY OTHER PURPOSE.
3.11 Priming the Detergent and
Rinse Additive Lines ................................. 9
3.12 Checking for Correct Chemical
Concentration ............................................ 9
4. OPERATION ........................................ 11
4.1 Location and Description of Controls.......11
4.2 Startup ..................................................... 12
4.3 Loading ................................................... 12
4.4 Operation................................................. 13
4.5 Between Cycles ...................................... 13
4.6 Shutdown................................................. 13
5. CLEANING .......................................... 14
5.1 Daily Cleaning (or as required) ............... 14
5.2 Weekly Cleaning (or as required)........... 14
5.3 Exterior Cleaning (as required) ............... 15
5.4 Deliming (as required) ............................ 15
6. TROUBLESHOOTING ......................... 16
MEIKO reserves the right to change any specifications without notice at any time.
© 2010 MEIKO USA, Inc. All rights reserved.
1. INTRODUCTION ................................... 3
1.1 Overview of Equipment ............................ 3
1.2 General Safety Information ........................ 3
2. TRANSPORT AND SHIPPING .............. 3
3. INSTALLATION ..................................... 4
3.1 Overview of Installation ............................. 4
3.2 Requirements Before Installation .............. 4
3.3 Uncrating, Positioning and Leveling ............ 5
3.4 Accessing the Utility Connections ............ 5
3.5 Main Electrical Supply Connection ........... 6
3.6 Dispensing System Overview .................. 6
3.7 Connecting Chemical Containers
or Dispensers ........................................... 7
3.8 Fresh Water Supply Connection ............... 8
3.9 Drain Hose Positioning ............................. 8
3.10 Final Assembly.......................................... 9
MEIKO ACCEPTS NO RESPONSIBILITY FOR DAMAGE TO THE APPLIANCE, SURROUNDING
EQUIPMENT OR ENVIRONMENT THAT IS CAUSED BY INAPPROPRIATE INSTALLATION OR
OPERATION, OR FROM ANY SERVICE THAT IS UNDERTAKEN BY NON-AUTHORIZED PERSONNEL,
OR FROM THE USE OF ANY PARTS EXCEPT THOSE THAT ARE APPROVED BY THE
MANUFACTURER. ANY SUCH INSTALLATION, USE OR SERVICE WILL IMMEDIATELY VOID THE
MANUFACTURER’S WARRANTY.
ANY MODIFICATIONS TO THE APPLIANCE THAT ARE PERFORMED WITHOUT THE WRITTEN
PERMISSION OF MEIKO WILL IMMEDIATELY VOID THE MANUFACTURER’S WARRANTY.
AN ELECTRICAL WIRING DIAGRAM IS LOCATED INSIDE THE
LOWER-FRONT COMPARTMENT OF THIS MACHINE.
MEIKO • 1349 Heil Quaker Blvd. • La Vergne, TN 37086
Phone: (615) 399-6600 • (800) 55-MEIKO • Fax: (615) 399-6620
www.meiko.us
Page 3
2 TRANSPORT HIPPING AND S
CAUTION
During shipping and installation, the
glasswasher may ONLY be positioned upright
or on its left side. Some water may remain in
the lines after pre-shipping testing. If the unit
is positioned in any manner EXCEPT upright
or on its left side, this water can affect the
operation of the water level sensor.
IMPORTANT
• Observe any notices on the crating
material that pertain to shipping.
• Use care when transporting the
equipment.
• As you unpack the equipment, check that
all components shown on the shipping
invoice are present and intact. Be sure to
check for shipping damage. If shipping
damage is present, call MEIKO Customer
Service at 1-800-868-3840, providing full
details on the customer, serial number and
extent of damage present. MEIKO will file
a freight claim based on this information.
WARNING!
In NO EVENT should a damaged
appliance be installed or operated!
SECTION 1 - INTRODUCTION
1.2 General Safety Information
The following symbols and headings are used
throughout this manual to indicate possible haz-
ards to persons or to the equipment. The sym-
bols and headings are shown in order of impor-
tance. The descriptive text following these head-
ings is italicized for easy recognition.
WARNING! Possible hazard to per-
sons, such as from elec-
trical shock, crushing, or
hot surfaces.
CAUTION Possible hazard to the
glasswasher or to other
equipment.
IMPORTANT Vital information or tips for
the installer or operator.
NOTE Information or tips for the
installer or operator.
1 INTRODUCTION
1.1 Overview of Equipment
The MEIKO Model FV 40.2 G is a commercial
glasswasher designed for cleaning glassware,
dishes, cutlery and kitchen utensils with a
minimum of employee intervention or
supervision.
A control keypad allows easy selection of three
different dishwashing cycles to accommodate
different levels of soiling. A digital display
permits easy monitoring of operation.
Other features of the unit that affect operation
include:
Auto Safe - An internal booster heater is
regulated by the electronic control system to
ensure a proper sanitizing final rinse
temperature, regardless of the incoming water
temperature.
Soft Start - The wash water is pumped at a
reduced pressure for the first few seconds of
the wash cycle. This protects the ware from
being moved or damaged by a sudden burst
of pressure.
Pumped Rinse - An internal rinse pump
ensures that the final rinse pressure is
constant.
Pumped Drain - Accommodates wall or floor
drains.
Aqua Stop - The unit will automatically shut
down if a water leak is detected.
For efficient and SAFE operation, be sure to
follow the installation and operating
instructions provided in this manual. In
particular, all safety symbols and notices on
the equipment and in the supplied
documentation must be followed.
IMPORTANT
The Model FV 40.2 G glasswasher has been
designed exclusively for the washing of
glassware, dishes, cutlery and kitchen utensils
in a commercial or institutional setting and must
not be used for any other purpose.

Termékspecifikációk

Márka: Meiko
Kategória: mosogatógép
Modell: FV 40.2 G

Szüksége van segítségre?

Ha segítségre van szüksége Meiko FV 40.2 G, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mosogatógép Meiko

Meiko

Meiko FV 40.2 G Útmutató

11 Augusztus 2024
Meiko

Meiko FV 40.2 Útmutató

11 Június 2024
Meiko

Meiko M-iClean Útmutató

11 Június 2024

Útmutatók mosogatógép

Legújabb útmutatók mosogatógép

Miele

Miele G 4485 Útmutató

10 Április 2025
Miele

Miele G 4940 SC Front Jubilee Útmutató

10 Április 2025
AEG

AEG Favorit R 3Prog Útmutató

9 Április 2025
Miele

Miele G 5432 SCU Útmutató

9 Április 2025
Miele

Miele G 5495 SCVi XXL Active Plus Útmutató

9 Április 2025
Oranier

Oranier GAVI 7592 XL Útmutató

9 Április 2025
Amica

Amica DIM44D6EBq Útmutató

9 Április 2025
Sharp

Sharp QW-I1GI47EX Útmutató

9 Április 2025
Beko

Beko BDFN26450XC Útmutató

8 Április 2025
Asko

Asko DFI544B Útmutató

8 Április 2025