Használati útmutató Metra AX-HYKIA2-SWC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra AX-HYKIA2-SWC (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.3 csillagra

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AX-HYKIA2-SWC

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 1/15/18 INSTAX-HYKIA2-SWC

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.)

TABLE OF CONTENTS

Connections to be made ....................................2-3

Installing the AX-HYKIA2-SWC ..............................3

Programming the AX-HYKIA2-SWC ......................4

Steering wheel control settings .......................4-7

- L.E.D. feedback ...................................................4

- Changing radio type ..........................................5

-

Remapping the steering wheel control buttons

..5-6

-

Dual assignment instructions (long button press)

..6-7

Troubleshooting .....................................................7

Hyundai Data Interface with SWC2012-2016

APPLICATIONS

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains BlueLink

• Designed for amplified* and non-amplified models

• Retains the factory backup camera

• Retains balance and fade

• Micro “B” USB updatable

HYUNDAI

Veloster (without NAV) 2016

Veloster 2012-2015

• AX-HYKIA2-SWC interface

• AX-HYKIA2-SWC harness

• 16-pin harness with stripped leads

• Female 3.5mm connector with stripped leads

* Requires the AX-HYKIA-SPDIF (sold separately)

Termékspecifikációk