Használati útmutató Metra AXDIS-PO13

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra AXDIS-PO13 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak.

/ 6 PDF

AXDIS-PO13

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 10/4/21 INSTAXDIS-PO13

ATTENTION!With the key out of the

ignition, disconnect the negative battery

terminal before installing this product. Ensure

that all installation connections are secure

before cycling the ignition to test this product.

NOTE: Refer to the instructions included with

the aftermarket radio.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter

• Crimp tool and connectors

(ex. butt splice connectors, bellcaps, etc.)

or

• Solder gun, solder, and heat shrink

• Tape

• Zip-ties

TABLE OF CONTENTS

Connections ............................................................2

Installing the AXDIS-PO13 interface ......................3

Installing the Fiber Optic Cable.............................3

Programming the AXSWC interface .....................4

Data Interface with SWC

Porsche(with MOST 25 amp) 2010-2016

APPLICATIONS

• Provides accessory power

• Retains RAP

(retained accessory power)

• Designed for MOST fiber

amplified system

• Retains reverse camera

• Micro-B USB updatable

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Retains steering wheel controls

• Retains balance

Porsche

Panamera 2010-2016 PCM 3.1

Cayenne 2012-2016 PCM 3.1

911 (991) 2012-2016 PCM 3.1

2008-up

Pontiac

Xxxxxxx 2007-2008

Xxxxxxx 2009

• AXDIS-PO13 interface • AXDIS-PO13 harness • AXDIS-PO13 MOST-25 amplifier interface • AXSWC harness • AXSWC interface

• Female 3.5mm connector with stripped leads

Visit axxessinterfaces.comfor more detailed information about the product and up-to-date

vehicle specific applications

Termékspecifikációk