Használati útmutató Metra Axxess AX-ADFD02

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra Axxess AX-ADFD02 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.1 csillagra

AX-ADFD02

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 6/27/18 INSTAX-ADFD02

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

INTERFACE FEATURES

INTRODUCTION

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors or solder gun,

solder, and heat shrink • Wire cutter • Zip ties

TABLE OF CONTENTS

Connections to be made .......................................3

Installing & programming the AX-ADFD02

AX-ADBOX1 ...........................................................4

AX-ADBOX2 ..........................................................5

Extra features .........................................................6

Ford Data Interface 2011-up*

APPLICATIONS

See inside front cover

• Provides accessory power (12-volt 10-amp)

• Maintains the retained accessory power (R.A.P.) feature

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains SYNC

• Retains the factory AUX-IN jack

• Pre-wired ASWC-1 harness (ASWC-1 sold separately)

• Designed for non-amplified models

• Retains balance and fade

• Micro “B” USB updatable

The AX-ADFD02 harness is designed for, and must be used with, the

AX-ADBOX1 or AX-ADBOX2 interface (sold separately). Please refer to the

AX-ADBOX1 or AX-ADBOX2 for the 16-pin connector with stripped leads.

• AX-ADFD02 harness

*Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

Termékspecifikációk