Használati útmutató Metra Axxess AX-HON24RVC-6V

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra Axxess AX-HON24RVC-6V (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.4 csillagra

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

axxessinterfaces.com • metraonline.comaxxessinterfaces.com • metraonline.com

Axxess Integrate

®

Axxess Integrate

®

REV. 11/8/16REV. 11/8/16

Installation Instructions for AX-HON24RVC-6VInstallation Instructions for AX-HON24RVC-6V

INTERFACE FEATURES

• Retains the factory AUX-IN jack

• Retains the factory backup camera to an aftermarket radio

• Includes the AX-CAM6V 12-volt to 6-volt converter

INTERFACE COMPONENTS

• AX-HON24RVC-6V harness • AX-CAM6V 12-volt to 6-volt converter

AX-HON24RVC-6V

Honda (without touchscreen)

2015-up

• Wire cutter • Crimping tool • Solder gun • Tape

• Connectors (example: butt connectors, bell caps, etc.)

TOOLS REQUIRED

CAUTION!

All accessories, switches, climate controls panels, and especially air bag indicator

lights must be connected before cycling the ignition. Also, do not remove the factory radio with

the key in the on position, or while the vehicle is running.

APPLICATIONS

HONDA

Fit 2015-up

Pilot 2016-up

Ridgeline 2017-up

KPNOWLEDGE IS OWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

IMPORTANT

If you are having difficulties with the installation of this product, please call our

Tech Support line at . Before doing so, look over the instructions 1-800-253-TECH

a second time, and make sure the installation was performed exactly as the

instructions are stated. Please have the vehicle apart and ready to perform

troubleshooting steps before calling.

• Connect the Black wire of the AX-CAM6V to chassis ground.

• Connect the Red Blue/Red wire labeled "Camera Power 6V" to the wire of the AX-CAM6V.

•

Connect the reverse wire from the aftermarket radio, to the reverse signal in the vehicle,

and also to the wire of the AX-CAM6V.Blue/White

• Connect the Yellow RCA jack to the rear camera input of the aftermarket radio.

Termékspecifikációk