Használati útmutató Metra NITO-01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra NITO-01 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.0 csillagra

Installation instructions for part NITO-01

REV. 5/17/2017 INSTNITO-01

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

axxessinterfaces.com • metraonline.com© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION

• Provides accessory power (12-volt 10-amp)

• Provides NAV outputs (parking brake,

reverse, and speed sense)

• Pre-wired ASWC-1 harness (ASWC-1 sold

separately)

• Retains the factory backup camera

• Retains the audible parking sensor warning

• Retains the factory AUX-IN jack

• Used in amplified applications

• Adjustable gain control for overall volume

• High level speaker input

• Retains balance

• Micro “B” USB updatable

INTERFACE FEATURES

• Wire cutter • Crimp tool • Solder gun • Tape • Small flat-blade screwdriver

• Connectors (example: butt-connectors, bell caps, etc.)

TOOLS REQUIRED

NITO-01

Nissan Maxima 2016 Amplifier Interface

• NITO-01 interface • NITO-01 harness

• 16-pin harness with stripped leads • AX-CAM6V 12-volt to 6-volt converter

INTERFACE COMPONENTS

Connections to be made ...................................................2

Installing the NITO-01 .......................................................3

Initializing the NITO-01 .....................................................3

Adjusting the NITO-01 ......................................................3

Extra settings ....................................................................4

Table of Contents

Termékspecifikációk