Használati útmutató Metra XSVI-9006-NAV

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra XSVI-9006-NAV (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak.

/ 4 PDF

XSVI-9006-NAV

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/11/19 INSTXSVI-9006-NAV

Attention!Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Small flat-blade screwdriver

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Programming .........................................................3

Volkswagen Data Interface 2015-up

APPLICATIONS

• Provides accessory power

(12-volt 10-amp)

• Retains R.A.P. (retained

accessory power)

• Provides NAV outputs (parking

brake, reverse, speed sense)

• For use in non-amplified

systems, or when replacing an

amplified system

• 48-inch leads for remote tuner

location

• Pre-wired ASWC-1 harness

(ASWC-1 sold separately)

• Retains the factory backup

camera

• Retains balance and fade

• Micro-B USB updatable

Volkswagen

Beetle 2016-2019

Golf Series 2015-up

Jetta 2016-2018

Jetta GLI 2016-2018

Passat 2016-up

Tiguan 2016-2017

• XSVI-9006-NAV interface

• XSVI-9006-NAV harness

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle specific applications

Termékspecifikációk