Használati útmutató Microchip TC1041

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip TC1041 (28 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/28
2004 Microchip Technology Inc. DS00895A-page 1
AN895
INTRODUCTION
This application note shows how to design a
temperature sensor oscillator circuit using Microchip’s
low-cost MCP6001 operational amplifier (op amp) and
the MCP6541 comparator. Oscillator circuits can be
used to provide an accurate temperature measurement
with a Resistive Temperature Detector (RTD) sensor.
Oscillators provide a frequency output that is propor-
tional to temperature and are easily integrated into a
microcontroller system.
RC oscillators offer several advantages in precision
sensing applications. Oscillators do not require an
Analog-to-Digital Converter (ADC). The accuracy of the
frequency measurement is directly related to the quality
of the microcontroller’s clock signal and high-frequency
oscillators are available with accuracies of better than
10 ppm.
RTDs serve as the standard for precision temperature
measurements because of their excellent repeatability
and stability characteristics. A RTD can be character-
ized over it’s temperature measurement range to
obtain a table of coefficients that can be added to the
measured temperature in order to obtain an accuracy
better than 0.05°C. In addition, RTDs have a very fast
thermal response time.
Two oscillator circuits are shown in Figures 1 and 2 that
can be used with RTDs. The circuit shown in Figure 1
is a state variable RC oscillator that provides an output
frequency that is proportional to the square root of the
product of two temperature-sensing resistors. The
circuit shown in Figure 2, which is referred to as an
astable multi-vibrator or relaxation oscillator, provides a
square wave output with a single comparator. The state
variable oscillator is a good circuit for precision
applications, while the relaxation oscillator is a good
alternative for cost-sensitive applications.
FIGURE 1: State Variable Oscillator.
FIGURE 2: Relaxation Oscillator.
Author: Ezana Haile and Jim Lepkowski
Microchip Technology Inc.
Attributes:
Precision dual Element RTD
Sensor Circuit
Reliable Oscillation Startup
Freq. (R1 x R2)1/2
C1
VDD
VDD/2
R1 = RTDA
C2
VDD/2
R2 = RTDBR4
VDD/2
R3
R8
VDD/2
R7
VDD/2
R5
R6
VOUT
C5
C4
A2A3A5
A4
A1
VDD
R3
Attributes:
Low Cost Solution
Single Comparator Circuit
Square Wave Output
Freq. = 1/ (1.386 x R1 x C1)
V
OUT
C1VDD
R
1 = RTD
R4
R2
VDD
A1
Oscillator Circuits For RTD Temperature Sensors

Termékspecifikációk

Márka: Microchip
Kategória: nincs kategorizálva
Modell: TC1041

Szüksége van segítségre?

Ha segítségre van szüksége Microchip TC1041, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Microchip

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025