Használati útmutató Miiego MOOVE 55 SILENCE
Miiego
fejhallgató
MOOVE 55 SILENCE
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Miiego MOOVE 55 SILENCE (20 oldal) a fejhallgató kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/20

Quick Start Guide
ENG
DK
NOR
SE
1 - 2
3 - 4
5 - 6
7 - 8
FR
-
10
9
EST 31 41-
NL 11 21-
DE
1
15 17-
MOOVE 55 SILENCE
with HYBRID ACTIVE NOISE CANCELLING
DOWNLOAD THE
MIIEGO APP
PERSONALIZE YOUR AUDIO EXPERIENCE
www.MIIEGO.com/app

SPECIFICATIONS
BT v5.4 + AAC + SBC. Rechargeable 650 mA/h Li-ion battery.
Full charging time: around 2-3 hours.
Frequency range: 2.402-2.480GHz. Freq. Response: 20Hz-20KHz.
CARE, MAINTENANCE, SAFETY
WARNING: Do not use while driving or where vehicular traffic is present, or in any
other activity where failure to hear your surroundings could be dangerous. Use of
these headphones at excessive volumes may cause permanent hearing damage.
Always turn the volume down before use. Keep out of reach from children and
animals. Avoid direct sunlight. Product storage and working temperatures: from -5
degrees to +40 degrees. Do not dispose the battery in fire, as it may cause an
explosion. Any modifications to the device will void the user warranty and may
have consequences for your safety.
Pairing Your MOOVE 55 SILENCE by MIIEGO® Wireless Headphones
1: Make sure your MOOVE 55 SILENCEs are charged and turned OFF
2: Press and hold the M- button on the headphones for 3 seconds until the indicator
light flashes Red and Blue alternatively (pairing mode).
3: Activate BT on your phone or other device and search for BT devices and select
MOOVE 55 SILENCE by MIIEGO® .
1
1
2
3
Volume Up / Next Song
Press once / Hold
M-button
Turn headphones on / off. Play / pause.
Answer call, end / reject call. Siri
Volume Down / Previous Song
Press once / Hold
LED indicator for charging / pairing /
ANC (Green=On)
Line in AUX 3.5 mm
Charging port USB-C
Built-in Microphone
ANC noise cancelling / Ambient
/ Low latency button.
6
7
8
5
4
ABOUT ANC – Active Noise Cancelling
The Active Noise Cancelling (ANC) function will reduce unwanted environmental
noise and deliver a clearer audio performance.
Please note:
ANC is mainly used for low frequency band noise. Even though environmental
noise is reduced, it may not be entirely eliminated and voice etc. can be heard.
Smartphones may cause ANC interference/noise. If so, move the phone away
from the headphones.
Do not press the headphones or ear cushions, when ANC is on, as this may
interfere the ANC microphone and cause high 'beep' noise.
When ANC is ON it will consume more battery.
ENG
6
7
8
1
2
3
4
5

2
This device contains a lithium accumulator.
Improper use can cause overheating and fire.
Only listen to music in a moderate volume and
in moderate periods of time. Excessive exposure
to high sound levels can lead to noise-induced
hearing loss.
For California Residents: WARNING: This product contains
chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
Charging Your MIIEGO Headphones
When the Red light is on, the headphones are charging. When the Red light is off,
the headphones are fully charged. Full charging time is around 2-3 hours.
Next time charging
When you hear a warning tone of "battery low" every 180 seconds and the Red light
blinks, the battery status is low and needs charging.
Turning Your MIIEGO Headphones On and Off
ON: Press the M-Button for 3 seconds until the indicator light turns Blue.
OFF: Press the M-Button until the indicator light turns Red for 3 seconds.
Battery status with voice prompt when headphones are turned on
Battery high: 71-100%
Battery medium: 30-70%
Battery low: 0-29%
How to activate the ANC - Active Noise Cancelling function
Press Button 8 to activate the Noise Cancelling and Ambient functions.
When ANC is ON the green indicator light is ON. When Ambient is ON the green
indicator will flash.
How to activate the Low Latency function
Double-press Button 8 to activate Low Latency On and Off.
When Low Latency is activated, you will hear a tone.
Soft reset
Make sure you delete “MOOVE 55 SILENCE” from your phones BT-device settings
before resetting.
1: When power is off, press and hold the M-button for 5 seconds until the light flashes
blue and red.
2: Press and hold both +/- buttons simultaneously for 10 seconds until you see the
red light flashing 3 times. The headphones will then power OFF automatically.
Multi-point connection (pair 2 devices):
1: Connect your FIRST device as normal. Then, turn off Bluetooth in settings on that
device. The headphones will then automatically enter pairing mode again.
2: Connect your SECOND device as normal to the headphones.
3: Then activate your FIRST device again and turn on Bluetooth. Re-connect/pair
the headphones to that device again.
Activate Siri on iOS-device:
Access Siri by pressing the M-button 2 times.
ENG
Termékspecifikációk
Márka: | Miiego |
Kategória: | fejhallgató |
Modell: | MOOVE 55 SILENCE |
Szüksége van segítségre?
Ha segítségre van szüksége Miiego MOOVE 55 SILENCE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók fejhallgató Miiego
5 Január 2025
19 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024
2 Szeptember 2024
2 Szeptember 2024
2 Szeptember 2024
2 Szeptember 2024
Útmutatók fejhallgató
- fejhallgató Audix
- fejhallgató PowerA
- fejhallgató Kanex
- fejhallgató House Of Marley
- fejhallgató Crivit
- fejhallgató Magnavox
- fejhallgató Samsung
- fejhallgató OneOdio
- fejhallgató Wentronic
- fejhallgató Siemens
- fejhallgató AudioQuest
- fejhallgató Midland
- fejhallgató Bluefox
- fejhallgató MSI
- fejhallgató Iqua
Legújabb útmutatók fejhallgató
10 Április 2025
9 Április 2025
9 Április 2025
8 Április 2025
6 Április 2025
3 Április 2025
3 Április 2025
2 Április 2025
2 Április 2025
1 Április 2025