Használati útmutató Milwaukee 4097-20
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee 4097-20 (44 oldal) a fúrógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/44
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
HEAVY-DUTY DIAMOND CORING EQUIPMENT
EXTRA ROBUSTE OUTILLAGE DE CAROTTAGE AU DIAMANT
EQUIPO DE PERFORACION CON PUNTAS DE DIAMANTE PARA
TRABAJOS PESADOS
DYMODRILLS
FOREUSES DYMODRILL
DYMODRILLS
Cat. No. 4004 20A
Cat. No. 4005 20A
Cat. No. 4079 20A
Cat. No. 4090 15A
Cat. No. 4094 20A
Cat. No. 4096 20A
Cat. No. 4097-20 15A
DYMORIGS
OUTILLAGE DYMORIG
DYMORIGS
Cat. No. 4115 Small base
Petite base
Base pequeña
Cat. No. 4125 Small base
Petite base
Base pequeña
Cat. No. 4120 Large base
Grande base
Base grande
Cat. No. 4130 Large base
Grande base
Base grande
2
PERSONAL SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may result in electric shock, fi re and/or serious
injury. Save all warnings and instructions for future reference. The term "power
tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your fi nger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
SERVICE
• Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
3
SPECIFIC SAFETY RULES
•Diamond coring equipment requires the use
of water. When drilling overhead, use a liquid
collection system. Water in contact with the elec-
trical system of the tool may make exposed metal
parts of the tool "live" and could give the operator
an electric shock.
•Operate power tool by insulated grasping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring
or its own cord. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
•Wear ear protectors when diamond drilling.
Exposure to noise can cause hearing loss.
•When the bit is jammed, stop applying down-
ward pressure and turn o the tool. Investigate
and take corrective actions to eliminate the cause
of the bit jamming.
•When restarting a diamond drill in the work-
piece check that bit rotates freely before
starting. If the bit is jammed, it may not start, may
overload the tool, or may cause the diamond drill
to release from the workpiece.
•When securing the drill stand with anchors and
fasteners to the workpiece, ensure that the an-
choring used is capable of holding and restrain-
ing the machine during use. If the workpiece is
weak or porous, the anchor may pull out causing
the drill stand to release from the workpiece.
•When securing the drill stand with a vacuum
pad to the workpiece, install the pad on a
smooth, clean, non-porous surface. Do not
secure to laminated surfaces such as tiles
and composite coating. If the workpiece is not
smooth, fl at or well affi xed, the pad may pull away
from the workpiece.
•Ensure there is suffi cient vacuum level before
drilling. If the vacuum level is insuffi cient, the pad
may release from the workpiece.
•Never perform overhead drilling with the
machine secured only by the vacuum pad. If
the vacuum is lost, the pad will release from the
workpiece.
•When drilling through walls or ceilings, ensure
to protect persons and the work area on the
other side. The bit may extend through the hole
or the core may fall out on the other side.
•Always use a liquid collection system when
drilling overhead. Water in contact with an elec-
trical system of the tool may make exposed metal
parts of the tool "live" and could give the operator
an electric shock.
•Maintain tools carefully. Keep handles dry, clean
and free from oil and grease. Keep cutting edges
sharp and clean. Follow instructions for lubricating
and changing accessories. Periodically inspect tool
cords and extension cords for damage. Have dam-
aged parts repaired or replaced by a MILWAUKEE
service facility.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to fi lter out microscopic particles.
FUNCTIONAL DESCRIPTION
Clutch model
1
2
3
4
5
1. Twist-lock plug
2. Cord
3. Gear shift lever
4. Water shut-off valve
5. Threaded spindle
6. Nameplate
6
1
4
6
7
2
3
5
1. Twist-lock plug
2. Cord
3. Gear shift lever
4. Water shut-off valve
5. Spindle sleeve
6. Retaining ring
7. Shear pin
8. Nameplate
Shear pin model
8
Termékspecifikációk
| Márka: | Milwaukee |
| Kategória: | fúrógép |
| Modell: | 4097-20 |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee 4097-20, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók fúrógép Milwaukee
30 December 2025
8 Október 2024
1 Október 2024
30 Szeptember 2024
20 Szeptember 2024
13 Szeptember 2024
13 Szeptember 2024
11 Szeptember 2024
10 Szeptember 2024
8 Szeptember 2024
Útmutatók fúrógép
- fúrógép Ikea
- fúrógép Parkside
- fúrógép Worx
- fúrógép Bosch
- fúrógép Panasonic
- fúrógép AEG
- fúrógép Einhell
- fúrógép Stihl
- fúrógép Ozito
- fúrógép Makita
- fúrógép Hyundai
- fúrógép Flex
- fúrógép Scheppach
- fúrógép Ergotools Pattfield
- fúrógép Ribimex
- fúrógép Mafell
- fúrógép Kraftixx
- fúrógép Cecotec
- fúrógép Genesis
- fúrógép Güde
- fúrógép Hitachi
- fúrógép Toolcraft
- fúrógép Proviel
- fúrógép Hilti
- fúrógép Black & Decker
- fúrógép Workzone
- fúrógép Global
- fúrógép Kawasaki
- fúrógép Fieldmann
- fúrógép GO/ON
- fúrógép PowerPlus
- fúrógép DEDRA
- fúrógép Metabo
- fúrógép Handwerk
- fúrógép Powerfix
- fúrógép Biltema
- fúrógép BaseTech
- fúrógép Bavaria
- fúrógép RYOBI
- fúrógép Proxxon
- fúrógép HiKOKI
- fúrógép Festool
- fúrógép Yato
- fúrógép Velleman
- fúrógép Baumr-AG
- fúrógép McKenzie
- fúrógép Trotec
- fúrógép Delta
- fúrógép Zipper
- fúrógép Bavaria By Einhell
- fúrógép Herkules
- fúrógép Porter-Cable
- fúrógép Tanaka
- fúrógép DeWalt
- fúrógép Stanley
- fúrógép Silverline
- fúrógép Vonroc
- fúrógép Cotech
- fúrógép Alpha Tools
- fúrógép Luxor
- fúrógép Holzmann
- fúrógép Fein
- fúrógép Max Bahr
- fúrógép Cocraft
- fúrógép Craftsman
- fúrógép Laserliner
- fúrógép Maestro
- fúrógép Graphite
- fúrógép Hazet
- fúrógép Toolland
- fúrógép Ferm
- fúrógép Tryton
- fúrógép Skil
- fúrógép Meec Tools
- fúrógép Sun Joe
- fúrógép Dremel
- fúrógép Tacklife
- fúrógép Ferrex
- fúrógép Maktec
- fúrógép Steren
- fúrógép Bort
- fúrógép Malmbergs
- fúrógép Power Craft
- fúrógép Eibenstock
- fúrógép Topcraft
- fúrógép Festo
- fúrógép Sparky
- fúrógép Gamma
- fúrógép Clas Ohlson
- fúrógép Carat
- fúrógép Kress
- fúrógép Duro
- fúrógép Berner
- fúrógép Varo
- fúrógép Defort
- fúrógép Max
- fúrógép Truper
- fúrógép Kinzo
- fúrógép Bruder Mannesmann
- fúrógép Powerblade
- fúrógép Meister Craft
- fúrógép RIDGID
- fúrógép Rupes
- fúrógép Batavia
- fúrógép Protool
- fúrógép Westfalia
- fúrógép Economy
- fúrógép Huvema
- fúrógép Black Decker
- fúrógép Stomer
- fúrógép Fe Powertools
- fúrógép Elu
- fúrógép Blucave
- fúrógép Ecomac
- fúrógép Lux Tools
- fúrógép Wolfcraft
- fúrógép Kreg
- fúrógép Sthor
- fúrógép Verto
- fúrógép Wurth
- fúrógép Spit
- fúrógép King Craft
- fúrógép Rok
- fúrógép Profitech
- fúrógép Narex
- fúrógép Rikon
- fúrógép Duro Pro
- fúrógép Baier
- fúrógép RUKO
- fúrógép Toolson
- fúrógép Felisatti
- fúrógép MSW
- fúrógép Robust
- fúrógép Einhell Bavaria
- fúrógép MyTool
- fúrógép G-Technology
- fúrógép Rodcraft
- fúrógép Stalco
- fúrógép Total
- fúrógép Netter Vibration
- fúrógép Kraftronic
Legújabb útmutatók fúrógép
2 Április 2025
2 Április 2025
2 Április 2025
1 Április 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
28 Március 2025
28 Március 2025