Használati útmutató Mitsubishi PZ-70CSW-E

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mitsubishi PZ-70CSW-E (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 30 ember találta hasznosnak.

/ 7 PDF

1

This CO

2 sensor changes the color of its LED light in accordance with the CO2 concentration within the room, optimizes the amount of airow, and thus

reduces the fresh air load.

■ This manual must be read both fully and carefully before commencing installation procedures; furthermore, the subsequent installation must be

performed correctly and safely in accordance with the instructions given.

■ After installation, ensure that this manual is given to the customer.

1. Safety Precautions

WARNING

Incorrect handling could cause serious injury or death.

- Never modify or repair by yourself.

If the product is modied or inappropriately repaired, electric shock, re, etc. could result. Contact your dealer for repair.

- Do not move or reinstall the product by yourself.

If it is installed improperly, electric shock, re, etc. could result. Contact your dealer or technical representative.

-Usethespeciedcablesforwiringandconnectthemsecurely.Holdthecablessoasnottoapplyexternalforceofthecablestothe

connector.

Improper connection could result in heat generation or re.

-Allelectricalworkmustbeperformedbyalicensedtechnician,accordingtolocalregulationsandtheinstructionsgiveninthisInstallation

manual.

-Installtheproductinarmandstableplacetowithstandtheproductweight.

If the strength is inadequate, the product could drop and cause an injury.

- EnsurethatinstallationworkisdonecorrectlyfollowingthisInstallationmanual.

If it is installed improperly, electric shock, re, etc. could result.

- Close the control cover after installation.

-Donotinstalltheproductinaplacewhereammablegasesmayleak.

If gas should leak or accumulate around the product, re or explosion could result.

- Do not use the product in special environments.

The product could be damaged if it is used in locations subject to large quantities of oil (including machine oil), steam, or sulde gas.

-Donotinstalltheunitinaplacewherethetemperaturerisesabove40˚C(104°F),wherelargeamountsofoil,steam,organicsolvents,or

corrosivegases,suchassulfuricgas,arepresent,orwhereacidic/alkalinesolutionsorspraysareusedfrequently.

These substances can compromise the performance of the unit or cause certain components of the unit to corrode, which can result in electric shock,

malfunctions, smoke, or re.

- Donotinstalltheproductinaplacewherehighlyhumid,likeabathroom,orotherwetplace.

It could cause electric shock or injury.

CAUTION

Incorrect handling could cause injury or damage to property or household e󰀨ects.

- Wire so that it does not receive any tension.

Tension could cause wire breakage, heating or re.

-Sealthecablefromthesensorcasewithputtyetc.

Any dew, moisture, cockroaches, insects entering the unit could cause electric shock or malfunctions.

-Putonglovesduringinstallation.

Failure to do so could cause injury.

-Toavoiddiscoloration,donotusebenzene,thinner,ethanol,hypochlorousacidorchemicalragtocleanthecase.Tocleanthecase,wipe

withasoftclothsoakedinwaterwithmilddetergent,wipeo󰀨thedetergentwithawetcloth,andwipeo󰀨waterwithadrycloth.

Lossnay CO2 Sensor Wall-Mounted Type

PZ-70CSW-E

Installation and Instruction Manual

2107876H65401

Termékspecifikációk