Használati útmutató MSR Hubba Hubba NX 2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót MSR Hubba Hubba NX 2 (1 oldal) a sátor kategóriában. Ezt az útmutatót 32 ember találta hasznosnak.

/ 1 PDF

80-467-3

USE TIPS:All tents require staking; unsecured tents are susceptible

to wind damage. In some conditions, additional stakes and cord

may be required. Re-adjustment of stakes and rainfly may be

necessary to keep tent tight and weatherproof. For complete care

and use instructions, refer to the Owner’s Manual (available at

www.msrgear.com/HubbaHubbaNX).

HUBBA HUBBA

™

NX

Assembly Instructions

MOUNTAINS RAFETYESEARCH

®

© 2016 Cascade Designs, Inc.

4000 First Avenue South

Seattle, WA 98134 USA

1-800-531-9531

1-206-505-9500

PREPARE FOR SETUP

ATTACH HUBBED POLES

ATTACH CLIPS

ATTACH RAINFLY

1. Spread tent out and stake out four corners tightly.

2. Assemble poles.

1. Insert tips of two hubbed poles into grommets at one end

of tent floor, followed by the remaining two at the other.

2. Insert short ridge pole into two grommets at midpoint of

tent ceiling.

1. Attach clips to pole along length of tent and ridge pole.1. Lay rainfly over tent, aligning red webbing to red stake loops,

gray webbing to gray stake loops. Attach the rainfly’s midpoint

grommets to ridge pole.

2. Stretch out vestibule until taut and stake down, making sure

seams align with frame.

PACKAGE INCLUDES:

Frame assembly, tent body, rainfly, stakes

Termékspecifikációk